Motorized vessels are typically required to stay at least 100 feet (approximately 30 meters) away from a diver down flag in most regions. This distance helps ensure the safety of divers by reducing the risk of collisions and providing a buffer zone for their activities. However, local regulations may vary, so it's essential to check specific guidelines for the area where diving occurs. Always prioritize diver safety and adhere to local laws regarding diver down flags.
100 ft
In Texas, vessels must remain at least 100 feet away from diver down flags when operating. This distance is intended to protect divers in the water and ensure their safety while they are submerged. Operators should always be vigilant and respectful of these safety measures to avoid accidents.
100'
50 ft
Diver down flag was created in 1956.
Diver Down was created on 1982-04-14.
In Florida, vessels must travel at no wake speed when within 300 feet of a diver-down flag when operating in open water. This law is designed to protect divers from potential hazards posed by boats. The diver-down flag signals that divers are in the water, and maintaining a safe distance helps ensure their safety.
100 feet
A diver is underwater in the area. Stay at least 100 ft away.
Jacques Cousteau used a flag with a golden "t" on a blue background, known as the "diver down" flag. This flag indicates that there is a diver submerged in the area, serving as a warning to other vessels to proceed with caution.
A diver down flag, or scuba flag, is a flag used on the water to indicate that there is a diver below. Two styles of flag are in use. Internationally, the code flag alfa/alpha, which is white and blue, is used to signal that the vessel has a diver down and other vessels should keep well clear at slow speed. In North America it is conventionally red with a white stripe from the upper left corner to the lower right corner.
A diver down flag, or scuba flag, is a flag used on the water to indicate that there is a diver below. Two styles of flag are in use. Internationally, the code flag alfa/alpha, which is white and blue, is used to signal that the vessel has a diver down and other vessels should keep well clear at slow speed. In North America it is conventionally red with a white stripe from the upper left corner to the lower right corner.