0
It depends on whether both are certified electricans or not. Often times one electrican is certified and one is an electricans apprentice. If both are certified, I thin the per hour rate would be around $150 - $160.
If one is an electrician's apprentice, $130 is probably more reasonable.
What else can I help you with?
What should I know before hiring an electrical contractor?
Before hiring an electrical contractor, you should read about his or her qualification. You can read more at www.merchantcircle.com › Top › CO › Colorado Springs › 80915 -
Do you have to have electrical license to work on a light fixture as a contractor?
An electrical contractor has to have a contractors licence. A home owner can work on his own lighting fixtures. In the fluorescent fixtures now there is a quick connect plug that allows maintenance men to change ballasts without having to have an electrical licence. For maintenance men to qualify they have to be shown the correct procedure to change out a ballast from a qualified licenced person. This is usually a certified electrician.
How much should an electrical contractor charge per hour?
Electrical contractors typically charge between $50 to $150 per hour, depending on factors like location, experience, and type of work. It's important to get quotes from multiple contractors to find the best rate for your specific project.
What should you look for when hiring electrical contractors?
You want to find an electrical contractor that is in the union. This means that he has passed the appropriate tests and is well-prepared to work for you.
How much money should an electrical contractor charge a company for contracting under his electrical license?
In California you cannot do this unless the company is placed on your license. The qualifying provisions would be such as an RME. If you do this you become totally liable for any work done by the other company, and I believe if you get caught doing this you may loose your license. Before doing this I would strongly advise you to contact your State Contractors License Board for further guidelines and assistance. This other company should hire you to perform the necessary work. If you are not able to perform this work yourself then consider hiring qualified electricians to work for you as employees and perform the work.
How do you wire in a 7500 watt portable generator to your house panel?
For a homeowner to it is a complicated job in as much as you have to know wire sizes, ampacity of wires and proper electrical workmanship. A permit must be taken out as there will be a disconnect and re connection of the utility electrical supply. Such a project should be left to a licensed electrical contractor to take out the proper permits and call for proper inspections. When you call the contractor as him if there is a charge to come out and estimate the job. If there is, find another contractor. Get at least three quotes. Ask if a permit is needed. If the answer is no, find another contractor. By taking this route it will leave you confident that if any mishaps happen to the installation down the road your insurance company will be behind you 100%.
Where should you charge iPhone 4S?
From any appropriate electrical socket.
Can your employer charge a 1099 employee for workmans comp?
An employer should not charge a 1099 employee for workman's comp. If you get a 1099 you are not in an employer, employee relationship You are an independent contractor.
How long to change a house electrical service from 100 amps to 200 amps?
If the electrical contractor has all of the materials ready for the job, the man hours should be about eight hours.
What tape should be used to repair electronics?
Typically electricians use a type of tape known as electricians tape. This can be bought at any hardware store or dollar store, and is designed to insulate and shield electrical wires properly.
What are the levels of electricians?
Electricians go through different stages in their career. It usually starts with an Apprentice Electrician - they’re just starting out, learning the trade hands-on while studying under experienced electricians. Next is the Journeyman Electrician, someone who has completed training and passed a licensing exam. They can work on their own, read blueprints, install wiring, and handle most electrical jobs without supervision. Then comes the Master Electrician - this is someone with years of experience, advanced knowledge, and usually leadership or project management responsibilities. They often supervise other electricians and pull permits for big projects. In some areas, there’s also a Residential Wireman, who focuses mainly on home electrical systems, and doesn’t do heavy industrial or commercial work. So, whether you're hiring for home or business, knowing these levels helps you choose the right professional. If you're looking for someone skilled and local, a licensed Electrician Abilene Texas professional can guide you based on the level of service you need.
What kinds of licenses and training should I expect my remodeling professionals to have?
First of all, make sure your contractor is licensed, bonded and insured before signing on the dotted line. The general contractor usually hires all the subcontractors which are your plumbers, electricians and carpenters and you will want to get in writing, from him, that all of them are properly licensed/trained for the jobs they are doing.
