In an Israeli single phase system the hot wire (live) is brown, the neutral (0V) is blue and the ground is green with a yellow tracer. In older installations the hot is red and the neutral is black. However occasionally these colors aren't exact. For example you may see brown and black wires. In this case the brown is the hot.
You should always verify the wiring especially if the standard colors (blue, brown, and green with a yellow stripe) are not present.
Speed wire color code of Toyota 2008 Camry
WHAT ARE"89-NISSAN MAXIMA RADIO WIRE COLOR CODES
There are many reasons why wires have color codes. This is to ensure the right wire goes to the right place.
What colorstarter wire , forMercedes Benz form 2006 throw 2008
there is not one.
According to color code, it is the speaker negative wire.
Electrons do not know color codes. They flow as potential is applied [voltage] from positive to a more negative potential. Therefore the color code applies to humans that can read the color code. The COLOR CODE while not universal applies to weiring whereby if you start at the source with one color that color must remain constant till the end of the circuit Reason being that if you branch in the middle you will know which wire you are working with and its use and potential. Most county have their own color code some follow a set of protocols some do not except it must follows a color code. I may add that passive components have a recognized and well set color code to recognize the component visually by the color code.
go to www.the12volt.com
The red wire is the positive wire. The black wire is the ground wire. The green wire is speaker wire. The white wire is the auxiliary wire.
what are the radio color codes for a2009 chevy impala
The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.
The red wire is the positive wire. The yellow and green wires are the speaker wires. The brown or black wire is the ground wire. The white wire is and auxiliary wire.