Thin-set mortar, commonly used for installing floor tiles, is generally considered non-toxic once it has fully cured. However, the dust created during installation or any uncured material can pose a risk if ingested by dogs. It's always best to keep pets away from construction areas and ensure proper ventilation. If you suspect your dog has ingested thin-set or is exhibiting unusual symptoms, consult a veterinarian.
NO! This acid is used on cement . The fumes are HIGHLY toxic.
yes they can sit anywhere! what a stupid question!
You should get a thin pad that can provide cushioning when covering your tile floor with a layer of carpet. This is so that the carpet can be placed evenly on top without having the grooves of the tile show through
There is no reason to wax a tile floor.
I wouldn't recommend it. Most wall tiles are very smooth and wouldn't have any grit for the thin-set to adhere to.
form_title= Floor Tile Installation form_header= Make your home your dream home with floor tile. Where will the tile be installed?*= _ [50] What is the square footage of the space?*= _ [50] What color do you want the tile?*= _ [50]
cost to remove tile floor
what is the waste allowance with floor tile
To install tile on a wood floor, first ensure the wood floor is clean and level. Apply a layer of cement backer board over the wood floor to create a stable surface for the tile. Use thin-set mortar to adhere the tiles to the backer board, spacing them evenly. Allow the mortar to dry before grouting the tiles. Seal the grout to protect it from stains and moisture.
cleaning porcelain tile deep clean tile floor floor cleaning services near me floor steam cleaner tile grout cleaning service grout service tile service
I have a tile floor in my kitchen.
Make sure the sub surface is clean.If it is not cement,you would have to add additive to the thin set addhesive to bond to the floor.Lay out floor from center of room off both walls.Snap line on floor to form a grid to fallow.Place the tile's in the grid depending on the size of the tile.If you lay 4 tile's on floor as example leave space for grout.You will have your grid square.With a 1/4" notch trowel place mixed thinset in the grid.Then apply some thin set to the underside of tile with trowel and remove excess with trowel for a good bond.If you place thinset on floor only and don't apply to underside of tile,they will all come loose in a matter of time.Good luck