advantix is much better
The starter tubes are one inch longer than the towing tubes and do not have holes in them
They have different packaged particles.
The water levels in different manometer tubes are different because they reflect the pressure differences between two points in a system. The height difference in the tubes indicates the pressure differential between the two points they are measuring. This pressure difference causes the fluid to rise or fall in each tube to balance the pressures.
The main difference between tube and pipe arises while considering the standard dimensions. The nominal sizes for pipes and tubes are determined differently. For pipes, the ID or Internal Dimension is the pipe size and for tubes the OD or Outer Dimension is considered the tube size.
Extended - extends beyond the barrel Flush - does not extend beyond the barrel
There is no difference. CFL is an abbreviation for Compact Fluorescent Light which has simply been designed to take up less space than the standard tubes.
The main difference between T8 and T12 lighting fixtures is the size of the fluorescent tubes they use. T8 fixtures use thinner tubes that are 1 inch in diameter, while T12 fixtures use thicker tubes that are 1.5 inches in diameter. T8 fixtures are more energy efficient and provide better light quality compared to T12 fixtures.
Cleat wiring is exposed while in conduit wiring the wires are well protected inside tubes/pipes.
Tubes clipped - Fallopian tubes are clipped and it is reversible. Tubes cauterized (burned) - Tubes are burned (not reversible). Tubes tied - Doctors don't do this procedure that often, but it is what it is, your fallopian tubes are tied. (reversible but with difficulty and lower success rate)
The uterine tubes in fetal pigs are in the same location as they are in humans. However, the size of uterine tubes in humans is much larger.
Pipe n tube are same in shape etc. BUT only difference is Pipe is used for Transferring Material (Gas, Liquid etc.) AND where it is used for Heat Exchanging purpose , It is called TUBE.
A socket is a female fitting that connects to a pipe or tubing, while a coupling is a device that connects two pipes or tubes together. Couplings can be either rigid or flexible, while sockets are typically fixed and do not allow movement.