Yes many but the best one to use would depend also on the surface and type of soil. For the best all around industrial strength cleaner, I recommend simple green. To go any stronger you would probably have to use a solvent or lacquer thinner which some surfaces can't take.
drench the soil with 40mls of jeyes fluid to 5 litres of water
Jeyes Fluid is the best thing i have found to work--however if you are going to have animals living there, it may be harmful to their skin. Care should be taken during application to avoid damage to the eyes and mucous membranes. This product is made in New Zealand. Try removing the top layer of soil and put it in the garbage or trash. Mix remaining soil with lime. Add new soil.
cleaning
biomassbiomass
If soil remains on a device after cleaning, you can try using a soft brush or cloth to gently remove it. If that doesn't work, you can use a small amount of mild soap or rubbing alcohol on a cloth to help dissolve and remove the soil. Just be careful not to use too much liquid to avoid damaging the device.
root cap
The basic approach to cleaning contaminated soil involves physical methods like excavation and soil washing, as well as chemical methods like oxidation and stabilization. Biological methods using bacteria or plants can also be used to break down contaminants. The chosen method depends on the type and extent of contamination.
No. Hot water extraction is considered to be the best method for removing embedded soil and other contaminants. It is also the preferred cleaning method by the leading carpet manufacturers.
The fluid goes inside the air holes/pockets in the soil/sponge/material.
Basic carpet cleaning, which may include spot removal, steam cleaning, and preconditioning should run about $33 a room. Extras like scotchgard, deep soil scrubbing and furniture moving will cost extra.
The basic approaches to cleaning contaminated soil include physical methods such as excavation and soil washing, chemical methods like soil vapor extraction and chemical oxidation, and biological methods such as phytoremediation using plants and microorganisms to degrade or immobilize contaminants. These approaches can be used alone or in combination depending on the type and extent of contamination.
Basic approaches to cleaning contaminated soil include bioremediation, which uses microorganisms to break down pollutants; phytoremediation, which involves using plants to remove contaminants; and soil washing, where contaminants are removed using water or chemical solutions. Additionally, thermal treatment methods such as incineration or thermal desorption can be used to clean contaminated soil.