Yes, you can replace PC3-8500 RAM with PC3-10600 RAM, as both are DDR3 memory types and are compatible with the same slots. However, the system will operate at the lower speed of PC3-8500 if your motherboard or processor does not support the higher speed of PC3-10600. Always check your motherboard specifications to ensure compatibility and optimal performance.
pc3-6400
12
While this all looks like gobbledygook at first, you simply have to break-down the list of terms in the title. 7200 SATA is the type and speed of a hard drive (7,200 RPM), and the 1GB PC3-10600 DDR3 refers to a specific type and amount of RAM.
If you mean from 7400 to 10600, then it would be ((10600-7400)/7400) * 100 = 43.24% increase. If you mean from 10600 to 7400, then it would be 7400 is 69.8% of 10600.
Yes because 10600 million = 10,600,000,000 and 10.600 billion = 10,600,000,000
To set bit PC3 on the 8255 Programmable Peripheral Interface (PPI), you need to configure the control word appropriately. The control word should be set to 80H (in hexadecimal), which configures Port C in mode 0 and sets PC3 as an output. This allows you to control PC3 by writing a logic high (1) to it. To ensure that PC3 is set, you would write a value of 8 (for PC3 high) to Port C after setting the control word.
23% of 8500= 23% * 8500= 0.23 * 8500= 1955
8.7% of 8500= 8.7% * 8500= 0.087 * 8500= 739.5
8500 metres = 8500/1 metres
40% of 8500 = 40% * 8500 = 0.4 * 8500 = 3400
10600
10600