0
What else can I help you with?
Computer is turned on but absolutely nothing appears on the monitor. What can I do to best troubleshoot this problem?
Assuming there is power to the monitor (the 'on' indicator is illuminated)... Check the cable from the monitor to the CPU is connected... (try another cable to be sure). If that's okay - the next thing to check would be the graphics card inside the computer (best done by a competent technician).
Can the WII be connected to a computer using a usb cable?
No
Device connected by cable to CPU of computer?
peripheral
External drives are typically connected to the computer by?
a cable.
How can you connect a printer to a computer?
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
What is the audio out cable on a CD ROM connected to in the computer?
YouQ=?
Your yellow cable from your router has nowhere to fit in your computer you have a netgear 4 port router?
'Yellow' is descriptive but does not identify the cable. A description of the ends of the cable would be helpful. However, if your computer is connected to the network then the yellow cable is unnecessary. It may be a management cable or an alternative connection. If your computer is not connected to the network then it is likely that the yellow cable is the rj-45 connection and that you need to install a network card for your computer.
Why does the monitor say no signal when the computer boots up even though the monitor works?
There might be a problem with the cable between the computer and the monitor, or with the graphics card inside the computer. Check that the cable is plugged in between the computer and the monitor. cable,monitor and graphics card all work but I still can't get the monitor to work no signal could the processor cause this problem
How is your printer connected to your computer?
your printer can be connected to the computer in two ways. 1. the printer can be connected by a usb (universal serial bus) cable to the computer. 2. the computer can also transmit data via a network.
If you disconnect the patch cable that connects your computer to the modem and then reconnect it do you have to reinstall anything?
No. The computer software installed is not affected by the cable being connected.
How do you hook up mbox2 to computer?
The MBox2 is connected with a USB cable.
How you can connect a computer to another computer by a single networking cable?
You have to have a special cable which is "cross connection cable" or something like that.
