0
THE QUESTION IN FULL... I have a combo amp for the microphone and it works fine at low volume but when you turn it up it screams at you. The band im in only does light hearted practicing in a small room, with 1 guitar, a bass and drumkit. So I dont want to pay out for some ridiculous PA system, The mic doesnt seem to like the other instuments playing either! just wondred if anyone has any tips on how to set up the amp, of where to position the amps and mic, so there can be more volume and less screaming feedback! thanks
What else can I help you with?
How to diagnose microphone feedback feedback?
Microphone feedback is caused by the feeding the same signal back to the microphone, usually through a monitor speaker in a live concert situation. Because most microphones are not linear in frequency response, the feedback is usually being exaggerated and is heard as either a slow low sound or a really fast and spiky tone. For example a Shure SM58 has a spike around 1khz that usually feeds back really easily if you put your hand on top of the grille. If the feedback is really slow, it is usually below 1khz, if it is fast, it is usually above 1khz. You can try to remove feedback with better gain staging, better microphone choices and with an equalizer.
What is a sentence for earsplitting?
There was an earsplitting scream from the room next door.The feedback from the microphone was earsplitting.
What do you do in the last step of the writing process?
Getting feedback and revising againGetting feedback and revising again
How do you stop a microphone?
Pull off the plug.
Where can you get a rockband microphone for wii?
Try going to Game Stop stores and see if they have an individual microphone available.
How can I improve the sound quality of my recordings using a feedback microphone?
To improve sound quality using a feedback microphone, ensure the microphone is positioned correctly, adjust the gain levels carefully, use a pop filter to reduce plosive sounds, and consider using a soundproofing setup to minimize background noise. Experiment with different settings and placements to find the best sound quality for your recordings.
What is the best way to stop feedback in live sound?
You can ensure that the speakers are not too close to microphones and you can ensure that the pickup from the mics is not too great. If the microphone pickup is very sensitive this may cause more feedback, reducing this and using your mixer and amp to increase the volume is a good idea. If you are using stage monitors, try reducing the volume of these or implementing a feedback destroyer for those channels which the monitors are on.
How can you amplify?
You amplify by getting a microphone and speakers. Once you have played into the microphone i then amplifies into the speaker and a louder volume is created
What causes feedback in a sound reinforcement system?
Acoustic feedback occurs when the amplified sound from any loudspeaker re-enters the sound system through any open microphone and is amplified again and again. It is due to close placement of microphone to loudspeaker, open mic or reflective surfaces of the area etc.
This is the constructive or destructive overlap of waves Example the high pitched feedback when a microphone gets too close to a speaker?
This is an example of destructive interference of waves. When the sound waves picked up by the microphone and the sound waves produced by the speaker are at opposite phases, they interfere destructively, causing the high-pitched feedback noise.
When a microphone gets too close to it's speaker why does it screech?
When a microphone gets too close to its speaker, it forms a feedback loop where sound picked up by the mic is re-amplified by the speaker. This continuous loop creates a high-pitched noise, known as feedback or screeching. Adjusting the distance or angle between the microphone and speaker helps prevent this issue.
What is the price range for a Shure Beta 58A?
A Shure Beta 58 A vocal microphone can cost anywhere between $159.00 to $179.00. Reviews for this microphone has been very good. It is reported to be very clear and feedback resistant.
