How do L1, L2, and L3 work
If L1 is parallel to L2 and L2 is parallel to L3 then L1 is parallel to L3.
Unscrewing any light bulb in series will result in the others turning off. If they are in parallel, unscrewing one will have no effect. For example, say we have lights bulbs L1, L2, and L3, where L1 and L2 are in parallel and L3 is in series with L1 and L2. If L1 is unscrewed: L2 and L3 will stay lit. If L2 is unscrewed: L1 and L3 will stay lit. If L3 is unscrewed: L1 and L2 will turn off.
l1 is in motherboards l2 is on processor newer processor has l3 too
L1, L2, and L3
If there are given two parallel line L1 and L2, and a third line L3 that is perpendicular to L1, then the line L3 must also be perpendicular to L2.
L1 = 128KB MaxL2 = 4MB Max
You can identify the leads by using a multimeter to measure the resistance between each lead. The resistance between L1 and L2 should be higher than between L1 and L3 and L2 and L3. You can also consult the motor's wiring diagram for guidance.
It uses L1 L2 and L3.
U1, l2, d1, l1,u1, l2, d3, r1, d1, r2, u1, l2, r1, u2, r1, u1, l2, r1, d1, l1, r1, d3, r3, u1, l2, d1, l1, u3, r1, u1, l1, r3, d1, l3, r2, d2, r1, d1, l3, u3, r1, d1,r1, d1, l2
U3 L2 D1 R1 U1 L3 D1 L1 D3 L1 U1 D1 R3 U1 L2 D1 R4 U1 R1 U2 R1 U1 L2 R1 D3 L1 D1 L4 U3 R4 U1 R1 D1 L3 U1 R2 L3 D1 L1 D3 L2 U3 R6 L6 D1 R1 D1 L1 D1 R1 U1 R3 D1 R2 U1 L3 xauyala
From a three phase four wire distribution system the voltages would be as follows. From L1 to N - 277 volts. From L2 to N - 277 volts. From L3 to N - 277 volts. From L1 to L2 - 480 volts. From L2 to L3 - 480 volts. From L3 to L1 -480 volts.
L3-d1-r1-d1-l1-d1-r1-d1-l3-r2-u4-l2-d1-r1-u1-r2-d4-l3-u2-d2-r2-u1-l1-r2-u3-l1-d2-r1-u2-r2-d1-l1-u1-l2-d2-r1-u1-d3-l1-u2-d2-r3-u1-l2-u2-r1-d2-r1-d1-l1