To hook up a condenser, first ensure the power is off to avoid electrical shocks. Connect the condenser's inlet to the water supply and the outlet to the drainage system, ensuring proper seals to prevent leaks. Then, connect the electrical wiring according to the manufacturer's specifications, usually involving connecting power leads and control wires. Finally, check all connections for security and leaks before turning the power back on and testing the system.
There is no drain on an AC condenser it is a closed pressurised system. To drain it you have to hook up a machine that sucks the freon out.
The negative side of the coil is connected to the breaker points and condenser. The posotive side comes from the ignition switch. And the center terminal is connected to the center terminal of the distributor cap. ID REPLACE IT WITH A HEI MUCH BETTER THEN A POINTS SYSTEM.AND IT ONLY HAS ONE POWER WIRE TO HOOK UP.
If you are referring to the RF noise suppression condenser sometimes found on car alternators or generators (older cars), the case of the condenser is grounded and the pigtail goes to the positive.
Blue Yeti is a type on condenser microphone. You cannot hook one to an Xbox360 and talk to people on Xbox live.
get a VCR player and hook up it by the back inputs
you can probably get away with that just make sure you have an expansion valve on the evaporator. An expansion valve will keep liquid from getting back to the compressor.
No
They did not hook up.
Tagalog for hook up: kumunekta
It is very easy to get a surround sound hook up on the Viewsonic Widescreen TV hook up
diagram to hook up switch leg
Hook Me Up was created on 2007-11-03.