CIRCUIT
The address of the Pioneer Mutual Hook And Ladder is: 3230 J St, Sacramento, CA 95816
With some basic technical know how,installing the Pioneer CDX FM687 CD changer should be an easy tsk.
You get the anntenna cable and then you stick it into the stereo you idiot.
I have no answer for you but mine does the same thing.
Hook up for a KDL-50R550A, HTS-S600,BDP-S5100, Motorola DCT6400 and a Pioneer VCR/DVD Recorder Combo Unit.
To hook up the dimmer wire on your Pioneer stereo in a 2003 Mitsubishi Galant, locate the dimmer wire from the car's wiring harness, usually a light green or gray wire. Connect this wire to the corresponding dimmer input on the Pioneer stereo, typically labeled as "Dimmer" or "Illumination." Ensure that the connections are secure and insulated to prevent any short circuits. Finally, test the dimmer function to confirm it's working correctly.
To hook up a HTP 200-sw Pioneer, start by ensuring the unit is powered off and unplugged. Connect the speaker wires to the appropriate terminals, ensuring positive and negative connections are matched correctly. Next, connect any input sources, such as a receiver or audio device, using the appropriate cables. Finally, plug in the power cord and turn the unit on to test the setup.
Just use the harness for the old player. It must have all required wires including the battery wire and the ignition wire.
Yes, You can it doesnt matter what brand the speakers are as long as the reciever specs and the speaker wattage is around the same. Oh and i just hooked up the pioneer vsx 1021 to the sony w-3000 and it seems to do alright.( not an authority on home theater systems)
get a VCR player and hook up it by the back inputs
No
They did not hook up.