First of all disconnect the battery and then start installing cables to solenoid.make sure all connection are cleaned by filing or by sanding with sand paper . And on your mounting spot it also should be filed clean of rust and paint. Mount your solenoid using both holes to make sure it is in place firm. Facing the solenoid from across the motor. On the right side install the + cable to the large terminal. On the left side in stall the cable going to your pump motor. And then install the small cable to the left or S marked small post. Reconnect your battery and try moving plow for to see if its working properly . Don
If you get a wiring package from Hoopy it will give you the diagram. I believe that they haven't changed the location since the earlier models and if so you hook into the wiring behind the passenger taillight.
You can find a wiring diagram that shows you how to hook up a trailer wiring harness on a 1998 Pontiac Transport at most auto parts stores. A Pontiac repair manual should have the diagram in it.
You can get the mirror wiring diagram needed to hook up 8 wires for 1999 Tahoe at the motor vehicle text books.
I assume you mean a starter solenoid. Look at how the old one is hooked up. Put the new one in that way. ...and disconnect the battery first.
They don't hook them up. If you bought it at a dealer, make him hook it up for you.
You probably can't hook it up. Old TV's don't have the ports that are needed or the wiring.
it have the AB shift solenoid the 3-2 pwm solenoid
You can purchase a plug at Circuit city or Best Buy that will plug into the original plug and it will come with a wiring diagram to hook up your After market stereo Cockerknot
wiring to hook up a boat trailer is the same as any other trailer. most plugs obtained from an auto store will have diagram and instructios
what wires do i need to hook up to the alternator
The word you're looking for is solenoid.
The front of the transmission just below where the cooler hoses hook up.