You grab the word submarine and pull it down.
put the word submarine on it
You drag the word "submarine" itself onto the submarine. Then you wait for it to sink.
You have to bring the word submarine down to the bottom of the screen.
yes, if the metal is gold it will sink
To install a bathroom sink, first turn off the water supply, disconnect the old sink, place the new sink in position, connect the drain and water lines, secure the sink to the wall or vanity, and test for leaks.
if the metal sinks in water is is proof it is gold
To install a hot water dispenser at your sink, you will need to first shut off the water supply to the sink. Then, install the dispenser unit near the sink, connect it to the water supply line, and plug it into an electrical outlet. Finally, test the dispenser to ensure it is working properly.
Because a pebble is denser than water thus making it sink oil is not denser than water. you can test this by pouring some oil in a glass of water it floats on top of the water it doesn't sink it is the same theory with the oil tanker in the sea.
To plumb a bathroom sink effectively, first install the drain pipe and trap underneath the sink. Connect the water supply lines to the faucet and the hot and cold water valves. Make sure all connections are tight and secure. Test the sink by running water to check for leaks. Adjust as needed.
To install a bathroom sink, first turn off the water supply and disconnect the old sink. Place the new sink in position and secure it to the wall and countertop. Connect the drain and water supply lines, then seal around the edges. Test for leaks and make any necessary adjustments.
To install a pedestal sink, first turn off the water supply and remove the old sink. Place the pedestal in position and secure it to the floor. Attach the sink basin to the wall and connect the plumbing. Finally, seal any gaps and turn the water supply back on to test for leaks.
To repair a bathroom sink, start by turning off the water supply and removing the sink stopper. Check for any clogs or leaks in the drain and pipes. Replace any damaged parts, such as the faucet or drain assembly. Reassemble the sink and turn the water supply back on to test for leaks.