No Ratchet and Clank a crack in time has more powerful weapons in tools of destruction
yh
yes, the series goes r&c, r&c 2 locked and loaded, r&c 3 up your arsenal, ratchet gladiator, r&c size matters, r&c tools of destruction, r&c quest for booty, r&c a crank in time. and coming fall 2011 Ratchet and Clank: All 4 One and it includes the new co-op mode were you can play as Ratchet, Clank, Qwark, Dr Nefarious. It's a bit like marvel: ultimate alliance. IT'S GONNA BE AWESOME!!
Ratchet and Crank is by Sony Computer Entertainment
Clank, plank, flank, bank, frank, crank, spank, tank, and thank.
A 22 mm crank axle
The crank sensor is between the block and the radiator fan. It has a black cord that goes to a connector on the drivers side of the motor. All you need is a 10MM socket a short rachet extension and a 1/4" rachet. You should remove part of the air intake it hase on 10MM bolt and one 10MM nut. It sits on top of the radiator. When you have removed the intake you will see the sensor.
crank 2 high voltage the 1st one sucked
take off the distributer cap and then crank it and watch to see if the rotor is spinning when you crank it over and if it's not then you have a bad timing chain or 2 on those engines, usually need a new engine after that though
The better machine shops can drill and tap the crank for you. Might be cheaper to buy a newer crank.
tank, bank, sank, hank, rank, & yank, frank, drank, stank, spank, dank, shank, prank, crank, lank, thank, blank, clank, flank, shrank, plank,
starlight
if the cam and crank are not turning you cannot mess up the valves BUT if the crank is not turning ,you have a major problem,as the starter motor turns the crankthe crank should tun regardless of the woodruff key falling out at the same time if the crank turns and the cam doesnt the timing will be wrong and need the woodruff key replaced to keep cam and gears where they need to be