answersLogoWhite

0

1. Turn key to position 2. Keep in mind position 1 will turn on radio, but position 2 will illuminate the warning indicators on the dash.

2. Service due or past due will display. You still need to cycle thru the display and bring it up again. Cycle to the mileage indicator and then press the up or down arrow until the service due / past due is displayed

3. Press and hold the reset button. This is the black stick on the dash used to reset the odometer and to dim the dash lights.

4. A message will display "to reset, press and hold for 3 seconds". Release the black stick then press and hold it again for 3 seconds.

5. Indicator should reset and tell you the next service A or B is due in XXX miles.

6. Print this out and put in the glove box so you don't have to search the web for the solution again.

That will not work. Here is the working-solution:

How to reset service indicator on Mercedes Benz C280 2006

1- Begin the process by turning the ignition key to the no. 1 (On) position.

2- Push the system selection buttons until "Kilometre reading" appears on the multi-function display.

3- Push the dimmer knob ("R" button) three times; you should hear a beep and voltage should read out on the multi-function display.

4- Turn the ignition key to the no.2 (Run) position.

5- Push the forward/back scroll buttons until "Service display" appears on the multi-function display.

6- Push the dimmer knob ("R" button) once; "Oil type" should appear on the multi-function display. Use the +/- buttons to select the oil type that was added to the engine.

7- Push the forward/back scroll buttons until "Confirm oil reset, press R button for 3s" appears on the multi-function display.

Push the dimmer knob ("R" button) in and hold it for three seconds; "Service confirmed" should appear on the multi-function display.

8- Push the forward/back scroll buttons until "Service display" appears on the multi-function display.

9- Push the system selection button until "Kilometre reading" appears on the multi-function display, then turn the ignition key to off position.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

You neend timing marks on Mercedes c280 1996?

how to reset ttiming chain on a 1996 mercedes benz c280


Where to add coolant 1994 Mercedes c280?

were do I put coolant in mercedes 1994 c280


Where is the starter located on a 2006 C280?

On a 2006 Mercedes-Benz C280, the starter is located on the passenger side of the engine, near the bottom of the engine block. It is positioned just above the transmission and is accessible from under the vehicle. To replace or service the starter, you may need to remove some components for better access.


Oil change in 1995 Mercedes c280?

what oil do i use when i change my oil in my 1995 Mercedes Benz c280


Where is fuel filter on 1996 C280 Mercedes located?

where is the Fuel Filter is located: for a 1996 Mercedes Benz C280


Location of Oil Dipstick for Mercedes Benz C280?

where is the oil dipstick located on a 1998 mercedes benz c280


Fuse location for Mercedes c280 Climate Control?

c280 fuse diagram


Where is the ac fuse for Mercedes c280?

Where is the fuse box on my 1999 c280 mb


How do you replace AC expansion valve on Mercedes c280?

how do I replace the AC expansion valve on a Mercedes C280 sedan. location and procedure


How do you set up telephone on 2007 Mercedes C280?

How do you turn your phone in c280 2007


How do you reset a 1996 c280 Mercedes?

Resetting a 1996 c 280 Mercedes can be done by asking questions of a person who is either a mechanic or works at an auto store. The owner's manual of the Mercedes and a 1996 c 280 Mercedes Chilton can provide the information needed.


Where is fuel filter on 1998 Mercedes c280?

It