It is not possible to use the blinkers in GTA V.
press image and then press youtube then type in what you want after you do that press the right button for five seconds and there you go.
press the oil button then press the reset button hold for five seconds it will reset oil life monitor back to 100%
No, Groot goes to press the button that detonates the bomb instantly, but then pauses and presses the correct button, setting the timer for five minutes.
turn the ignition ON and set the display to compass/Temperature press the RESET button approximately five second the last variance zone number will display press the STEP button to select the new variance zone and press the RESET button to resume normal operation
Press the fuel button until engine oil life appears on screen. Press and hold select button for five seconds. Oil life reset will appear on screen for 10 seconds. The system is then reset.
With the radio off, press the SET button. SET will appear on the display for five seconds. Within the five seconds, press and hold the right arrow on the SEEK button until the correct minute appears. Press and hold the left arrow on the SEEK button until the correct hour appears. OR Preass and hold HR until the correct hour appears. Press and hold MN until the correct minute appears. Whichever applies to your model of radio.
Push and hold the sleep button for 4 seconds, then slide the slider to the right to shut it down. * "close" in this answer was read as "shut down"
Just press the fourth button 4 times lol
Hold the power button until it shuts down and then when it has, wait about five minutes. After that, press the power button to start it back up again.
press and hold the red (end call) button for five seconds or so.
the five objectives you need to do are so easy that you just have to press the start button to look at what they are.
To activate the autolock feature: Enter the five-digit permanent entry code into keyless entry keypad (This can be founnd on a sticker inside your trunk if you don't know it.). Press and hold the 7/8 button on the keyless entry keypad within five seconds of entering the code. Press and then release the 3/4 button within five seconds of pressing and holding the 7/8 button. Release the 7/8 button on keyless entry keypad within five seconds of releasing the 3/4 button. To deactivate the autolock, repeat the above sequence.