5/8"
The correct hex/allen wrench to remove a Moen faucet handle (for the Renzo model faucet) is 7/64".
1/8 wrench for that one.
You need 7/64".
The Moen part 155023 set screw typically requires a 3/32-inch hex wrench. This size is commonly used for securing the handle to the faucet body. Always confirm the specific requirements in the product manual or consult Moen's customer service for precise information.
There is only one wrench in the game, and that's the one you start with.
I believe that is 5/32.
i am guessing your talking about the drain plug and if so then yes an open end box end wrench or a socket and ratchet and some just require the ratchet only while others use Allen wrench, the size depends on the plugs head
7/64th hex key. Did it today. My integra is from approx 2006 2007, in Canada.
You need a 7mm Allen key.
That plug should not require an Allen wrench to remove it. Your 3/8" drive ratchet wrench should fit that plug perfectly.
The 2000 Plymouth head bolts will require a 5/8 socket. You will also need an extension for the ratchet. You should use a large ratchet, as you will need to put 120 pounds pressure on the head bolts.
Ratchet and Clank size matters have no cheats