0
What else can I help you with?
What Ethernet in IEEE designates thinnet as?
In the IEEE standards, Thinnet is designated as 10BASE2. This specification refers to a form of Ethernet that uses coaxial cable with a maximum segment length of 200 meters and supports data rates of 10 Mbps. Thinnet is known for its thinner, more flexible cable compared to the original thick coaxial Ethernet (10BASE5), which allows for easier installation in various environments.
Which thin Ethernet cable is used for 10-base-2 ethernet 802.3 ethernet thinnet?
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
What is the maxium lengthof the 10BASE2?
The maximum length of a 10Base2 thinwire ethernet cable is 185 ft.
What type of coaxial cable is used when wiring a 10Base2 Ethernet network?
rg6
What is the most common type connector used with coaxial cable on a ThinNet Ethernet network?
BNC
What is the most common type connector used with coaxial cable on at ThinNet Ethernet network?
BNC connecter
What in the most common type conector use with coaxial on a thingnet ethernet?
Thinnet coaxial cable uses a BNC twist connector.
What is 10base2?
10BaseT is an Ethernet cabling standard. 10BaseT devices can transfer data at a rate of up to 10 Mbps, and use twisted pairs of wires in their Ethernet cabling, as opposed to a coaxial cable. If you see wiring with an RJ-45 plug on the end, you probably have a 10BaseT or backwards-compatible product (such as 100BaseT or 1000BaseT).
Ethernet Cable?
form_title=Ethernet Cable form_header=Connect to the internet with an ethernet cable. How many ethernet cables would you need?= {(),1,2,3,4,5,6,7,8,9,10} How long do the cables need to be?=_ Where do you need the ethernet cables?=_
How do you do ethernet connection?
With an ethernet cable. (male)
What is another name for an Ethernet cable?
another name for an ethernet cable is a cat5 or cat5e cable
What IEEE standard sets the length of the cable segment and the number of devices on an Ethernet bus network?
The IEEE 802.3 standard governs Ethernet networks, specifying the maximum length of cable segments and the number of devices that can be connected. For traditional 10BASE2 (Thin Ethernet), the cable segment length is limited to 185 meters with a maximum of 30 devices. For 10BASE5 (Thick Ethernet), the cable can be up to 500 meters, but the total number of devices is typically similar. Ethernet standards have evolved, with modern implementations like 100BASE-TX and 1000BASE-T using twisted pair cabling and allowing for different configurations.
