If your engine is a 3.1L V6 and it sits horizontally in your engine bay (as in 3 spark plugs in front and 3 behind the block next to the firewall) then the valve should be located above the exhaust manifold that's in front of the firewall. it's inside a little tube and it should have written on the tube; "PCV".
There isn't one.
in the tank
To answer this i will need to know whatsize engine you have.
The crankshaft sensor is on the side of the engine behind the alternator. It is mounted close to the oil filter,
In the Fuel tank
The heater control valve on a 1992 Pontiac Grand Prix is typically located in the engine compartment, near the firewall on the passenger side. It is connected to the heater hoses that run between the engine and the heater core. To access it, you may need to remove some components or hoses for better visibility. Always refer to a repair manual for specific guidance and safety precautions.
Yes, a 1992 Pontiac Grand Am does have a timing belt. Diagrams can be found of them on the internet with a simple search.Ê
It will be located next to the flywheel which is by where the engine and tranny meet.
Its located on the radiator passanger side about 3" below the radiator cap.
should be drivers side, near valve cover.
Between the head and the block. First, remove intake manifold and exhaust manifold. Take the valve cover off and unbolt the head. Then, pull the head off and you'll see the gasket.
how to chang spark plugs in a 1992 Pontiac grand prix