answersLogoWhite

0

Pull the connectors off at the bulbs. But the PT's were great for having the switches go bad. Jiggle the switch around and see if the lights go off. If they do, go to the dealer and ask for a multifunction switch. They aren't terribly expensive. This is most likely your problem.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Hazard lights staying on constantly without you putting them on?

Relay contacts welded together


What are run lights?

For an engine to run on the tracks without any cars.


Why did lights come on in my PT Cruiser?

It depends on what lights, did you turn on a switch, open a door, If they are dash warning lights, you have a malfunction.


What causes Land Cruiser hazard lights to start flashing when engine is off?

The hazard lights on a Land Cruiser may start flashing when the engine is off due to a malfunction in the electrical system, such as a faulty relay or switch. Additionally, it could be triggered by a malfunction in the body control module, which manages various electrical functions. Another possibility is that the key fob is inadvertently activating the hazard lights. If the issue persists, it's advisable to have the vehicle inspected by a qualified technician.


Is it legal for a police cruiser to be parked at night with no lights at all on in a emergency lane on a highway?

Whether it's legal for a police cruiser to be parked at night without lights on in an emergency lane depends on local laws and regulations. In many jurisdictions, police vehicles are allowed to park in emergency lanes without lights if they are not responding to an active incident. However, best practices typically recommend that emergency lights be activated to ensure visibility and safety. It's always advisable to check specific local laws for precise regulations.


What is cause the the rear lights still on after turn off engine?

If you mean the brake lights are staying on, then the switch at thte pedal is sticking. Could be dirty or need adjusted. Switch is under dash at the pedal.


1999 Toyota land cruiser warning lights?

The warning lights on a 1999 Toyota Land Cruiser serve as indicators for various vehicle systems. Common warning lights include the check engine light, oil pressure warning, battery charge light, and brake warning light. If any of these lights illuminate, it’s essential to address the underlying issue promptly to ensure safe operation and prevent potential damage to the vehicle. Always refer to the owner’s manual for specific information related to warning lights and their meanings.


Where do you buy the black screws for the pt cruiser tail lights?

They should be available from the dealer.


What causes a PT cruiser fog lights to remain on?

A failed switch is a common cause.


Would check engine light in pt cruiser cause your car to stop running?

No. Check engine lights do not immobilize cars. But the light may be warning you of a problem that your car has that may be stopping it from running. FYI: Check engine lights come on for all sorts of problems, from a loose gas cap to an engine that has been completely destroyed. Regardless of what you might think that is causing the light, you should safely get your car to a certified auto-mechanic.


Brake lights what bulb for Chrysler cruiser?

Refer Lightingcatalog.com 1- 888-343-1974


No rear lights or brake lights on PT Cruiser. Could this be a fuse problem?

It could be, along with broken wires, unplugged connections, failed switches,