0
What else can I help you with?
Which image appears in shirt?
A fire in the factory
What company has a fox with a paint brush in the mouth for a logo?
Fox fire
Why does my external flash not fire every time?
Your external flash may not fire every time due to several reasons, such as low battery power, improper connection, or a malfunction in the flash unit. Check the battery level, ensure proper connection to the camera, and troubleshoot any technical issues to resolve the problem.
What does murple mean?
It means that like when a guys wee wee on fire or burning really badly + that could cause death really sad death.
How can I safely and effectively use steel wool for fire photography?
To safely and effectively use steel wool for fire photography, follow these steps: 1. Wear protective gear such as gloves and goggles. 2. Choose a safe outdoor location away from flammable materials. 3. Attach the steel wool to a whisk or wire for spinning. 4. Ignite the steel wool using a lighter or 9-volt battery. 5. Spin the steel wool in a circular motion while taking photos with a camera set to a long exposure. 6. Be mindful of sparks and embers, and have a fire extinguisher or water nearby for safety.
How many types of roller shutters are there?
"Types of roller shutters include: built-on roller shutter doors, integrated roller shutter, roller shutter with tilting laths, manual, manual tape, electric, and fire shutter."
Can you deafen a horse by the sound of a canon fire?
no you can not
What is artillery fire?
Big guns (canon) going off.
When was Day on Fire - film - created?
Day on Fire - film - was created in 2006.
What are the causes for a black and white film not to have images on it after developing it?
Assuming it was properly developed and that you mean the entire film, then the cause has to be insufficient exposure. This can be due to use of flash in low ambient light where the flash was way out of sync with the shutter (e.g. shutter set at 1/500 second or faster); a bad combination of shutter and aperture throughout (not likely); in the case of a range finder camera, the lens cap was left on; or most likely of all, the film was never transported through the cameral because it wasn't loaded properly. If it slips off when you close the back and start cranking, you can shoot until the cows come home and you won't expose one frame. Happened to me...just once. The proper way to load a film is to ensure the sprocket holes are engaged in the top and bottom sprockets of the take-up spool before you close the back. Then always fire off at least two frames with the lens cap on before taking a real photo, and ALWAYS watch the crank (what you use to rewind the film) when advancing the film during those two shots after you close the back. If it doesn't move while advancing to that second one, check if there's tension by rotating the crank slightly in the rewind direction. If you hear the film leader slip off, you just averted a catastrophe. If you go too far and wind the leader back in on an unexposed film, a camera store can usually retrieve it for you. Better to waste that film before you take 36 pictures of nothing. Some people will try to get 38 pictures out of a 36 exposure roll, and sooner or later they will lose when they "roll the dice" this way.
What is the duration of The Fire Raisers film?
The duration of The Fire Raisers - film - is 1.28 hours.
What is the duration of Fire Fighters film?
The duration of Fire Fighters - film - is 1200.0 seconds.
What is the duration of Fire Sale film?
The duration of Fire Sale - film - is 1.47 hours.
What is the duration of Catch a Fire film?
The duration of Catch a Fire - film - is 1.63 hours.
What is the duration of Reign of Fire film?
The duration of Reign of Fire - film - is 1.68 hours.
What is the duration of Lake of Fire film?
The duration of Lake of Fire - film - is 2.53 hours.
When was Lake of Fire - film - created?
Lake of Fire - film - was created in 2006-09.
