0
What else can I help you with?
A backyard swimming pool holds 200 cubic yards of waterWhat is the weight of the water in pounds?
Water weighs 62.42 pounds per cubic foot which is 561.78 pounds per cubic yard. Thus 200 cubic yards of water weighs 112,356 pounds.
What is the weight of the water in a swimming pool that holds sixty four cubic meters of water?
1 cubic meter = 1,000 liters64 cubic meters = 64,000 liters1 liter of water is supposed to have 1 kilogram of mass64,000 liters of water has 64,000 kilograms of massOn Earth, 1 kilogram of mass weighs 2.205 pounds.On Earth, 64,000 kilograms of mass weighs 141,096 pounds = 70.55 tons (rounded)
What is the filled weight of a 50' section of 2 12 inch hose?
The filled weight of a 50-foot section of 12-inch diameter hose can be calculated by considering the volume of water it holds and the weight of that water. A 12-inch diameter hose has a cross-sectional area of about 1 square foot, and 50 feet of hose would have a volume of approximately 50 cubic feet. Since water weighs about 62.4 pounds per cubic foot, the filled weight of the hose would be around 3,120 pounds (50 cubic feet x 62.4 pounds/cubic foot).
What is the weight of the water in a swimming pool that holds sixty-four cubic meters of water?
64 tons or 64 000 kg or 140800 lbs 1 cubic meter of fresh water is 1000kg or 2200lbs. It actually differs slightly with elevation but this is the general rule. A swimming pool will not consist of pure water (chlorine, urine etc.) and these substances can have different densities than water so the result can vary a tiny bit.
One cubic foot holds 7.48 gallons of water and one gallon of water weighs 8.33 pounds how much does a cubic foot of water weigh in pounds?
A cubic foot of water weighs 62.4 pounds (7.48 gallons * 8.33 pounds).
What is tare pounds?
Tare weight is the weight of packaging or container that holds a product, deducted from the gross weight to determine the net weight of the product. Tare pounds specifically refer to this weight measurement in pounds.
How much weight can a mobile home bathtub hold?
It will hold more weight than you can ever put into it !- My floor joists are 2x10 at 16 inch intervals, and I installed a 48 x 60 spa tub that holds about 20 cubic feet of water, that weighs around 1200 pounds. Include two average people in it and you have over 1,500 pounds ! - The floor holds just fine .
Your swimming pool is 1825 cm long 515cm wide 100cm deep how many ltr of water?
Figure out how many cubic meters it holds. A cubic meter is 1000 liters, so go from there.
Do you weight more when you have your period?
absolutely. your body holds water weight when you're on your period and you can gain up to five pounds.
How many gallons of dirt are in 1 cubic foot?
1 cubic foot holds about 7 gallons of dirt. The weight, however, will depend on how densely packed the dirt is.
How many pounds of clothes does a 1.46 cubic ft washer hold?
A 1.46 cubic foot washer typically holds about 10 to 12 pounds of laundry. This capacity is suitable for smaller loads, such as those for individuals or couples. However, the exact weight may vary depending on the type of fabric and how densely the clothes are packed. It's always best to check the manufacturer's guidelines for specific recommendations.
What would a million tons look like?
A million tons is an enormous weight equivalent to about 2.2 billion pounds. To visualize it, consider that it would take approximately 2,500 large elephants, each weighing around 4 tons, to equal a million tons. Alternatively, it could fill about 500 Olympic-sized swimming pools with water, as each pool holds about 2,500 cubic meters, or about 2.5 million kilograms, of water. This immense quantity illustrates the scale and weight of a million tons in everyday terms.
