0
Can areas of exposed concrete on the bottom of a gunite or plaster pool be repaired with water in the pool?
Wiki User
∙ 8y ago
No, because gunite will not dry if it is constantly being mixed with water. Drain your pool first.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
Why is bottom of concrete pool soft and mushy?
Sounds like you have a repair issue--plaster, a big leak or something else expensive. Bring in a professional to analyze the issue.
What can you do about very rough bottom and sides in your concrete pool?
Replaster the pool and keep the water chemically balanced (PH, alkalinity level etc..) this will keep the plaster from pitting thus keeping it smooth for a longer life.
where in montgomery can a person get a bottom dental partial repaired.?
Where in Hendersonville, TN can I get a lower partial repaired?
How do you secure studs to a concrete floor?
Attach your bottom plate 1st then attach studs to the bottom plate. The bottom plate can be fastened by using concrete nails or concrete anchor bolts.
What elements are at the bottom of the ladder of abstraction?
Concrete
What is the best bottom for a above ground pool?
concrete
What was the pantheon built with?
The Pantheon was made of stone, concrete, and over five different concrete mixtures. The dome had a heavier concrete mixture on the bottom, getting lighter as it got higher.
How do you get dirt stains off the bottom of a concrete bottom when a brush will not work?
by a chemical called stain out or by using a pumice stone.
How do you make a model pyramid out of plaster of Paris?
To build a model pyramid out of plaster of Paris, coat the inside of an ice cube tray with petroleum jelly. Pour plaster of Paris inside and allow to dry. Once dry, place the blocks in a square pattern, gluing them together with plaster of Paris. Stack another row atop the bottom row, insetting each row to form a pyramid shape.
Is 3.5 thick concrete ok for a basement floor?
yes it is, if that is the bottom floor
Is it possible to change a concrete pool into a liner pool if your inground concrete pool has cracks along the side down near the bottom?
Yes it can be done
How do you resurface a concrete shotcrete in-ground pool?
Unless you have some experience with concrete or any kind of plaster, i do not recommend it. This is a ultra specialized trade. it takes years to become a decent trowel man. First, your pool needs to be drained, as soon as you can get to the main drain on the deep end of your pool, remove the cover and unplug the bottom of it. This is a very important step , in case you have a lot of ground water, the pressure coming from underneath of your pool must be released by pulling the plug inside your main drain. After that, you will have to cut right underneath the tile line, all the way around. Cut it in a 45 degree angle, about 2 inches wide. A good bath with muriatic acid is the next step. Use a watering can to pour it; be careful with the fumes from the acid. The final touch would be the use of a concrete mixer to mix the plaster. You can carry it with a wheelbarrow and dump it into the pool. Use a round edge trowel to pull the plaster up on the walls. This is a very concise description of this process. Like i said before, unless you have some skills using a trowel, it is better to live it to a professional pool plaster company.
