0
Yes, you can use liquid stabilizer in a pool with a cartridge filter. Liquid stabilizers, typically cyanuric acid, help protect chlorine from being broken down by sunlight. When adding stabilizer, ensure it's well-dissolved and evenly distributed in the pool to avoid any clumping. Always follow the manufacturer’s instructions for the appropriate dosage based on your pool's volume.
What else can I help you with?
You added chlorine stablizer into the pool and now it is showing no chlorine?
Excessive levels of chlorine stabilizer can reduce the effectiveness of chlorine in the pool. Try diluting the pool water by partially draining and refilling it to lower the stabilizer concentration. Test the water again after dilution to see if the chlorine levels improve.
Is pool stabilizer and shock the same?
No, pool shock is normally a really strong chlorine and stabilizer is like sunscreen for the chlorine
Is there a cheap substitute for pool stabilizer?
no
What to use when pool water won't hold chlorine?
you have to aid a conditioner or stabilizer with cynaric acid in it.
Cloudy pool free chlorine is not reading stabilizer is low but pH is ok?
Add chlorine and stabilizer.
What to do when your pool does not retain chlorine?
Ad cyanuric acid/stabilizer, this is available from your pool shop
When adding stabilizer to a salt water pool is the backwash running while pouring in the stabilizer?
When adding stabilizer to a pool you should not have a backwash valve open. Stabilizer should be added directly into the skimmer basket and you should open the skimmer all the way and close off the main drains for 24 hours.
What kinds of chemicals are used in a standard pool?
"There are several components needed for pool chemistry; a dry or liquid chlorine along with a chlorine stabilizer, an acid for balancing pH, an algaecide to control and kill algae and also soda ash."
Can you use chlorine in a pool without a filter?
Yes, you can use chlorine in a pool without a filter, but it is not recommended. A filter is essential for removing debris and contaminants from the water, and without a filter, the effectiveness of the chlorine may be reduced, leading to poor water quality and potential health risks. It is best to use both chlorine and a filter for optimal pool maintenance.
Is muriatic acid the same as hth stabilizer?
No, muriatic acid and HTH stabilizer are not the same. Muriatic acid is a strong acid used to lower the pH of pool water, while HTH stabilizer (cyanuric acid) is used to prevent chlorine in the pool from being broken down by the sun's rays. Both serve different purposes in pool maintenance.
Why cant you maintain free chlorine in your pool?
Have you tested cyanuric acid ( stabilizer ) ?
How do you fix low stabilizer in your pool and low pH low alkalinity?
make sure chlorine is is at 1-3ppm, if pH is very low raise chlorine slightly higer than average. shock the pool after and run filter for over night. If pool still not stabilize then add PH high chemical.
