answersLogoWhite

0

The H100 has a flow rate of 20-70 gpm, if you are moving more than 70 gpm then yes, if not, then no.

User Avatar

Wiki User

20y ago

What else can I help you with?

Related Questions

How do you bypass a heater core in a 2001 Dodge pickup?

To bypass the heater core you need to remove the two water hoses going through the firewall from the engine compartment to the heater core and connect them together so that the water loops around back to the engine.


Do you need a heater core on a Saturn sl2?

Nope........... You can bypass it if its leaking and run the vehicle as normal..........


Does a hayward h400ed1 pool heater have a pilot light?

No, the Hayward H400ED1 pool heater does not have a pilot light. Instead, it uses electronic ignition, which means it ignites the gas burner electronically when heat is needed. This design enhances efficiency and eliminates the need for a continuously burning pilot light.


How can I properly perform a water heater bypass in my plumbing system?

To properly perform a water heater bypass in your plumbing system, you will need to shut off the water supply to the water heater, drain the water from the system, and then redirect the water flow around the water heater using a bypass pipe or valve. This will allow you to work on the water heater without disrupting the rest of your plumbing system. Be sure to follow all safety precautions and consult a professional if you are unsure of the process.


Why does the 2002 ford explorer keep blowing heater hoses?

could be head gasket problem. does your heater work? might need heater core , clogged up. do compression test. or bypass heater core and see if that works.


How do you find what heater hose is the inlet or outlet and how do you bypass them?

You don't need to know what hose is which just take them both off and run a pipe from one to the other. You can but bypass kits at the parts store. GoodluckJoe


Can you drive a truck if heater core is out?

yes. You would need to bypass the heater core in order for your coolant to still circulate properly. Check with your locat auto parts store. Some stores actually sell a bypass hose designed for this application. If not, you just need to connect your inlet and outlet hoses at the heater core together so it will circulate. Most auto parts stores will have a barbed fitting to connect them.


Can you bypass the heater core with a longer hose in a 1990 jeep wrangler?

Yes, or take one of the hoses loose at the heater core and take it back to the motor on the other one. Shouldn't need a new hose.


Does a car need the heater hose to run?

Kinda-sorta. Most cars, the heater is part of the cooling system. If you pull the heater hose off you're left with a hole that'll drain the coolant out. If for some reason you want to run a car w/o the heater hose or the heater, you need to make sure that the coolant still can circulate as it's expected. You'll either need to plug something, or run a bypass loop.


Can you bypass the heater core on a 1996 gt mustang?

Yes you can jus take the hoses from the firewall where they connect to the heater core an fit a hose or pipe in there an get 2 clamps am your good to go till you need heat again


How do you bypass the heater core in a 1993 Audi 100 Quattro?

To bypass the heater core in a 1993 Audi 100 Quattro, you'll need to locate the heater core hoses under the hood. Disconnect the two hoses that connect to the heater core, typically found on the firewall. Use a coupling or appropriate length of hose to connect the two heater core outlet pipes together, ensuring a tight fit to prevent leaks. Finally, check the coolant levels and top off as necessary.


Water leaks at the bottom of 1996 98 olds.Replaced bypass heater hose and water pump still leaks at the bottom of car.?

Need to replace the water pump.