I have this problem in my pebble tech pool. If you have a over flow valve plug it and fill your pool water level to the dark stain and make sure your chemical levals are good. Run your pool system for a full day this should help take it away. P.S. don't forget to unplug your over flow. I hope this helps
Well, it may take a bit longer than a day, a week , a month. You also have to scrub the tile line with a tile brush or a tile scrub pad and swimming pool tile cleaner( "tile soap"). Depending on the deposit it may take you all summer. This dark line could also be from a sliver type algaecide used to control black algae. If you did not follow the label instructions you are in for a lot of hard work. If you have not been cleaning your tiles on a weekly basis you probably have a calcium line also with the added part of the algae killer silver. It should come off in time tho.
k
To effectively remove a dark water stain on wood, you can try using a mixture of equal parts vinegar and olive oil. Apply the mixture to the stain and let it sit for a few hours before wiping it off. If the stain persists, you can also try using a wood cleaner or a commercial wood stain remover. Be sure to test any product on a small, inconspicuous area of the wood first to ensure it does not cause damage.
To remove a dark stain from slump block, try using a mixture of water and mild detergent to gently scrub the area. For more stubborn stains, you can use a mixture of water and vinegar or hydrogen peroxide. Test the solution on a small, inconspicuous area first to ensure it doesn't cause damage.
To effectively remove dark water stains from granite surfaces, mix a paste of baking soda and water, apply it to the stained area, and let it sit for a few hours. Then, scrub the area with a soft brush or cloth and rinse with water. Repeat the process if necessary until the stain is removed.
To remove a dark stain on wood furniture, the best methods include using a mixture of equal parts vinegar and water, applying a paste of baking soda and water, or using a commercial wood cleaner. Sanding and refinishing the affected area may also be necessary for stubborn stains.
WITH A PAIR OF SCISSORS.
Yes, you can stain cedar siding trim from a dark stain to a lighter stain, but it may require more effort. First, you'll need to thoroughly strip the existing dark stain using a wood stripper or sander to remove as much of the old finish as possible. Afterward, you can apply the lighter stain. Keep in mind that achieving the desired color may take multiple coats, and testing on a small, inconspicuous area is recommended.
I would remove the stain from the entire piece (leg or top) and then carefully re-stain it properly.
Vinegar has an acidic base which can be used to break down coffee stains. However the likelihood of it completely removing the stain is very low. These type of stains contain dark pigments which adhere to surfaces. To best remove these types of stains, a surfactant based cleaner should be used. This type of cleaner will allow the stain to become permeated by the water used when mixed with the cleaner. When a stain becomes water soluble, it loses it's adherence and can then be flushed away from the surface. The acidic base of vinegar can not do this because it is unable to make a stain water soluble. Therefore, it will only break down the outermost areas of the stain and be unable to break the immediate stain away from the surface it has adhered to.
To effectively remove dark spots on clothes after washing, try using a stain remover or pre-treating the spots before washing. You can also soak the garment in a mixture of water and vinegar or lemon juice before washing. Additionally, avoid using hot water or drying the garment in high heat as it can set the stains.
To effectively remove dark stains from hardwood floors, you can try using a mixture of vinegar and water, or a commercial hardwood floor cleaner. Apply the solution to the stained area and gently scrub with a soft cloth or sponge. Rinse the area with clean water and dry thoroughly. If the stain persists, you may need to sand and refinish the affected area.
Dry semen stains may appear as crusty, yellowish spots on clothing. They can be difficult to spot, especially on dark fabrics. It's best to check clothing under good lighting and wash them with cold water and a stain remover to remove the stain effectively.
To prepare a stock solution of Leishman stain, mix the Leishman stain powder with a suitable solvent like methanol or ethanol to make a concentrated solution. Filter the solution to remove any undissolved particles. Store the solution in a dark and cool place, away from light and heat.