To fix a pinhole in the metal wall of an above-ground pool, first drain the pool water below the leak. Clean the area around the hole thoroughly to remove any rust or debris. Use a metal patch or a piece of aluminum or stainless steel that is slightly larger than the hole, applying a waterproof adhesive or epoxy to secure it in place. Finally, seal the edges with a waterproof sealant to ensure durability before refilling the pool.
Look for water
Duck tape
It would get larger due to the expansion of the metal (see the related links)
Absolutely. Many people excacate and then place an above ground pool into the hole such that a foot or two stays above ground. Also make sure you either have clearance for your filter system or run the line into the ground and up to the filter as well.
To embed large metal objects in the ground, holes must first be drilled or dug into the ground. If the metal object is a post, then the post is installed in a hole in the ground that is then surrounded at the base by concrete before being covered back up.
When a sheet of metal with a hole in it is heated, the metal will expand uniformly, causing the hole to increase in size. This occurs because the metal atoms move apart as they gain energy from the heat. As a result, both the material surrounding the hole and the hole itself expand, but the relative size of the hole remains the same in relation to the metal around it. Thus, the hole does not close or change shape; it simply grows larger.
usaully an animal hole wont be to big and the ground around the sink hole may be soft.
A tomb is a structure that typically is above ground in which the casket is placed. A grave is a hole in the ground in which the casket is placed. A tomb stone is a structure placed above a grave to mark the location of the grave.
crawfish
underground they just come up in the rain because it flods the hole so they have to come up to breath
Buy a pool patch
18