0
when you are adding new water or filling for the first time you should first add your metal out or metal preventer which ever is in your area to prevent staining,second adjust your alkalinity to between 80 120 ppm. Three adjust your PH 7.2-7.5 24 hours after this is done you can add your Chlorine1.0 to 5.0 ppm 3.0 being ideal in a pool.Once a week use a non-chlorine shock to keep water sparkling Kenny Kummer Brody Chemical
What else can I help you with?
What will swimming in a chemically imbalanced pool do to you?
Swimming in chemically imbalanced swimming pool can give harm into your health. You need to keep in mind that every pool must have clean water, free from algae, dirt and sediments. There are may tips that you can get online on how to properly balance your swimming pool chemicals.
Do you have to add chemicals to your pool?
Yes, you may need to add chemicals to your pool to maintain proper water balance and sanitation. Common pool chemicals include chlorine for disinfection, pH adjusters to balance acidity levels, and algaecides to prevent algae growth. Regular testing and proper chemical treatment help keep your pool water safe and clean for swimming.
Is it acceptable to urinate in a swimming pool?
no it is not but if you have an accident don't worry, there are chemicals in the pool water to deal with such accidents.
What other chemical are in swimming pool water?
Other chemicals in swimming pool water include cyanuric acid (stabilizer), calcium hardness increaser, algaecides, and clarifiers. These chemicals help maintain water quality, prevent algae growth, and keep the pool water clear.
Density for pool water?
The density of pool water can vary depending on factors such as temperature, salinity, and the presence of chemicals like chlorine. On average, pool water has a density of about 1.0 g/cm3, which is slightly denser than pure water due to the dissolved minerals and chemicals. It is always important to test and maintain the proper balance of chemicals in pool water to ensure safe and comfortable swimming conditions.
What is swimming pool buffer?
Swimming pool buffer is a type of chemical treatment used to adjust the pH balance of the water. It helps to maintain proper water conditions which are ideal for swimming.
What is the remedy for a normal swimming pool tasting too salty?
Change the water making sure that the water table in your area is not too high. Check with your local city. Refill the pool and balance the water chemistry and use best quality chemicals possible.
What is the ongoing swimming pool cost after installation?
The main cost will be in keeping the water safe for swimming. This is done with chemicals and by have the pool cleaned. So, the cost of chemicals, electricity to run the filter system, and a pool service to keep the pool clean if one does not do it themselves will be the main costs.
Why is your swimming pool water murky?
What type of filter do you have? It may be D. E.
Can your eyes get ruined in a chlorine swimming pool?
Not if the water treatment chemicals aer at the correct levels.
Pool Chemicals?
form_title= Pool Chemicals form_header= Keep your pool clean and beautiful with pool chemicals. Do you have a salt water or chlorine pool?*= () Salt () Chlorine What kind of chemicals do you need?*= _ [50] What is the square footage of your pool?*= _ [50] Is your pool above ground or in ground?*= () Above Ground () In Ground
What chemicals are needed to add to a swimming pool?
Take a sample to a pool store with a "water chemistry certified" tech. They can tell you exactly what is missing. Normally pools need stabalizer, chlorine, acid and soda. Extra chems are used to rid or avoid problems
