answersLogoWhite

0

You don't have to close anything. Just use a short piece of hose or tubing to siphon enough water out to drop the level at least an inch below the skimmer box and inlet port. To siphon, place the entire length of hose into the pool and fill up, place your finger over one end and hang that end out of the pool, leaving the other end in the water. Gravity will take care of the rest.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you replace the poo skimmer door?

Drain the pool until the water level reaches two inches below the skimmer faceplate , remove the face plate using a screwdriver , remove the faceplate and skimmer , then replace the gasket and attach the skimmer and then the faceplate


Does the main drain line in skimmer have water in it when closing the pool?

No. You cannot use the main drain to lower the water level below the skimmer. This is because the main drain is not really a drain. It only connects right back to the 3 port valve in the skimmer.


Will the filter be affected by water above the skimmer?

It won't work as a skimmer if your water level is above the skimmer. If you watch how the skimmer works, the water is pulled in over the skimmer door and it won't "skim" the floating debris off the surface of the water if the water level covers the entire opening, your skimmer will just suck in water that is below the surface. If you keep the water level so it's at least below the opening an inch or so, you should be o.k. If you've recently had alot of rain, you may need to drain some water out of the pool so your skimmers function properly.


To put in a new skimmer does the pool have to be empty of water?

No you just have to get the water level below the skimmer after that you should have no trouble making repairs.


How do you replace a different size skimmer box?

To replace a skimmer box with a different size, first, turn off the pool pump and drain the water to below the skimmer level. Remove the existing skimmer box by detaching it from the plumbing and cutting any sealant or adhesive. Install the new skimmer by following the manufacturer's instructions, ensuring it fits securely in the opening and aligns with the existing plumbing. Finally, seal around the edges with appropriate sealant and refill the pool to the proper level before restarting the pump.


When do you cut the hole for the return and skimmer when replacing the liner?

when your water level is about 6 inches below the item. when your water level is about 6 inches below the item.


How far below the waterline are pool return fittings installed?

I believe that they need to be at least below the bottom of the skimmer so that, if the waterline were to drop below the bottom of the skimmer, the returns would not run dry. In my pool they are about 15-18" below the usual water level.


How do you lower pool water below the skimmer?

To lower pool water below the skimmer, you can use a submersible pump or a garden hose to siphon water out. If using a pump, place it in the shallow end of the pool and let it run until the water level drops below the skimmer. Alternatively, you can create a siphon by placing one end of a hose in the pool and the other end at a lower elevation, then filling the hose with water and letting gravity do the work. Always ensure to monitor the water level to avoid damaging the skimmer or pool equipment.


How do you reduce the water level on your 10000 gallon inground pool if it is about 2 inches above the skimmer top?

you can back wash the pool and drain to proper level Throw a pool party with lots of energetic kids.


Can you replace the skimmer without replacing the liner?

Yes you can. Drop the waterline in the pool below skimmer level, dig a whole around your skimmer to gain access. Unscrew the skimmer faceplate and remove it as well the old gasket. You also have to remove the second gasket between liner and wall. Detach the pipe(s) from the skimmer. Now install the new skimmer by attaching the pipe(s) to the skimmer put new gaskets in place screw the faceplate back on and you're done. Don't forget to fill your hole again and put water back in the pool to the appropriate level. ;-) Jens Poseidon Pool Services, Dunrobin, ON


What is the correct level of water in skimmer basket?

Ideally you show keep your water level between one third and one half the way up the opening of the skimmer. This is the level at which the skimmer(s) operate most efficiently.


Can you fill a pool in winter time when it has evaporated?

Yes just keep in mind that the water level in most winterised pools is below the skimmer outlet.