This is not the answer you're hoping for but it IS the answer. You're going to have to remove the liner. Fill in the depressions/low spots with sand & a little of dry portland cement. Dampen the mixture so it will hold together and put it where the depression(s) are. After you do this, there is a product called Perfect Pool Bottom made especially for above ground pools. I believe it also comes with the "coving" you should have against the pool wall at the bottom so your liner will not be forced under the aluminum walls by the water pressure. It'll be a little work, but it is fixed.(period) Good Luck
To level an above ground pool, you need to use a long carpenter's level to check the ground for any uneven areas. If you find any, you can use sand or a leveling kit to fill in the low spots and create a flat surface for the pool to sit on. It's important to ensure the ground is level to prevent the pool from shifting or becoming unstable.
Yes
how long will it take to fill a 3998 gal above ground pool, with a standard water hose
hose or some places the local fire dept will come and fill it for you for a donation
problem nobody nos go do it you wont
15000 gallons
Yes but you would probably be wise to compact it before putting the pool on it.
2,387 gallons
About 18,000 gallons.
the fill plug is up under the car on the muffler side,above the center motor mount,next to the transaxle.
if it's 4 ft deep 21,139.948 gal.
It has to be filled above the skimmer ( flow to pump) or else the filter will not work. Also, if too low the liner may dry out above the water line and cause it to shrink.