To install tile coping on an oval pool, first ensure the pool's edge is clean and free of debris. Measure and cut the tile coping to fit the pool's shape, allowing for slight overhangs at the edges. Use a suitable adhesive to secure the tiles in place, applying it evenly on the back of each tile before pressing them onto the pool edge. Finally, grout between the tiles and allow it to cure according to the manufacturer's instructions for a finished look.
A source for coping tile is Tropical Tile Inc They are a manufacturing company of coping tile for Swimming Pools and Spas (For Concrete or Vinyl Liner Pools.) I am sure if you contact them they can locate a retail supplier in your area. Tropical Tiles Inc 415 South East Ave Bridgeton, NJ 08302 Phone 856-455-6215 Fax 856-451-8906 9am - 5pm EST Nationwide Marketing
Yes, it is possible to replace coping without draining the pool or replacing the tile. Many pool professionals can remove and replace coping stones or bricks by carefully cutting them away and installing new ones without disturbing the pool water. This method helps minimize disruption and can be a more cost-effective solution. However, it's essential to ensure that the new coping matches the existing design and is properly sealed to prevent water infiltration.
W.R. Meadows Co. makes a product called Deck O Seal that will do the job of filling the gap between pool coping and cement deck.
The edge of a pool is commonly referred to as the "coping." Coping serves both a functional and aesthetic purpose, as it helps to prevent water from spilling over the edge and provides a finished look to the pool. It can be made from various materials, such as stone, tile, or concrete, and often extends slightly beyond the pool's surface for added safety and comfort.
form_title=Swimming Pool Remodel form_header=11663 What kind of pool is going to be remodeled?*= () Above ground () In ground What primary material is the interior pool surface made of?*= () Vinyl () Concrete () Tile () Fiberglass Please choose which features you are considering for your pool remodeling:*= [] Resurface pool [] New tile / coping [] New pool deck [] Repair or replace wall steps [] Plumbing or electrical beneath pool deck [] Skimmer replacement [] Pool lights [] Chlorination / cleaner system
One way would be to install drain tile in the yard around the pool deck to carry excess ground water away from the pool.
To replace the decorative tile border on a concrete pool, the pool will have to be drained. The old tile needs to be taken off and a new tile with waterproof grout or concrete can be installed. The pool should dry for a week or so, before it is refilled.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
I would not recommend it. It will not bond properly. You will have to install an appropriate sub-floor, then install the tile on that
Yes, you can install vinyl flooring over tile as long as the tile is in good condition and the surface is properly prepared.
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
tile Definitely tile!