0
It sounds like the lateral pipes in your sand filter are broken or you have too much sand in the filter. When we first got our pool I vacuumed with the filter on backwash. I found sand settled in the steps when I turned it back on to filter. I was later told by my pool store that you vacuum on waste and then use rinse before turning back on to filter. That stopped my problem except for dirty feet getting into the pool! both previous answers are correct to a point. the laterals or stand pipe could be cracked or broken' vacume on filter and then when finised backwash well and then rinse for aprox. 30 to 40 seconds and then go back to filer. make sure you rinse before going back to filter. Don't forget to turn off the pump before rotating the back wash valve! K
What else can I help you with?
Is there a risk of the swimming pool leaking?
Yes, there is a risk of the swimming pool leaking due to factors such as cracks in the pool structure, damaged pipes, or faulty seals. Regular maintenance and inspections can help prevent leaks.
Can you use masonry sand under your in ground pool?
Yes, you can use masonry sand under an in-ground pool, as it provides a stable base for the pool structure. However, it's important to ensure that the sand is well-graded and free of debris to prevent shifting or settling over time. Additionally, some pool installers recommend using a specifically designed pool base material, such as pool sand or crushed stone, for optimal drainage and support. Always consult with a professional for the best practices for your specific pool installation.
Does a pool liner pad stop an existing leak?
The pool liner pad is placed underneath the pool liner to prevent items from cutting through the liner. If the liner is already leaking, the liner pad will not stop the leak.
Can sand be used to level pool?
It already is used as pool sand!
Can you use household chlorine bleach to kill mosquito larvae an above ground swimming pool with a leaking sand filter?
Using household chlorine bleach to kill mosquito larvae in an above-ground swimming pool is not recommended. While bleach can be effective against some pests, it may not be safe for the pool environment and can disrupt the water chemistry. Instead, consider using pool-specific algaecides or larvicides designed for this purpose. Additionally, fixing the leaking sand filter is crucial to maintaining overall water quality and preventing mosquito breeding.
Can alum be used to clean an above-ground baquacil pool whose sand filter is leaking sand into the pool?
Alum is a floculent and these are often used to settle excessive amounts of dirt to the bottom of pools the are available from pool shops. It sounds like you will need to replace the laterals in your sand filter first so that you don't have this problem in the future. Take care vacuum the settled dirt and flock to waste do not put it through the filter.
What causes sand to be pumped into a pool?
I'm assuming you are using a sand filter. First, is the pump and filter hooked up corretly? Pumping the water through the filter the wrong way will blow sand into your pool. Is the control valve in the correct position? If it's in between positions it might let some sand into the pool. Is the control valve cracked or broken? Self explanitory.
Why do you have sand in your gunite pool?
If you have a sand filter the laterals in it may be starting to show signs of wear these wil blow sand from the sand filter into the pool when they wear out.
Is a sand pool and a salt pool the same?
No they aren't
If the pool was leaking 1 2 hour the pool has leaked 7 8 gallon of water how many gallons of water per hour is the swimming pool leaking?
If a pool was leaking for 12 hours and leaked out 78 gallons of water in total, then it would of leaked out 6.5 gallons every hour. This is a math problem.
How much sand will a pool pump hold?
The amount of sand in a pool filtration system depends on its size.
How do you stop water from leaking through gunite inground pool?
To stop water from leaking through a gunite inground pool, first inspect the pool for visible cracks or gaps in the surface and repair them using a suitable pool patching compound. Additionally, check the pool's plumbing and fittings for leaks, as these can contribute to water loss. If leaks persist, consider applying a waterproof sealant specifically designed for gunite surfaces. Regular maintenance and monitoring can help prevent future leaks.
