20 year old marbelite pool How to refinish, paint or what
Yes you can, There are many epoxy paints especially formulated for this purpose.
See the link for complete instructions and video.
Drain pool and clean with muriatic acid
NO NO !! You must remove the vinyl completely and then check what substrate you have. Concrete plaster or brick will be fine.
Why in the world would you want to paint a marbelite or plaster pool?
The plaster would not adhere to the liner. k
The eating away of marbelite in an old pool can be caused by several factors, including improper pH and alkalinity levels, which can lead to corrosion and erosion of the surface. Additionally, high levels of chlorine or other chemicals can contribute to the degradation of the marbelite. Environmental factors, such as water infiltration and freeze-thaw cycles, can also play a role in damaging the surface over time. Regular maintenance and water chemistry checks are essential to prevent such deterioration.
You should wait about 2 weeks before using a wheeled vac head OR follow the advice of the installer. He is the last authority on that subject.
Acid overdosing destroys total alkalinity which leads to etching of the Marbelite surface. Always dilute acidbefore dosing, and add to the weir while the pump is running
Your pool should be resurfaced when it starts to look shabby or in the case of marbelite or plaster; when it gets rough and uncomfortable to walk on., when black algae becomes a problem and chemical treatment is only a temporary measure. You can use a DIY system or get an expert to help you.
Yes you can BUT all the debris will re-enter the pool as its not being filtered
The only swimming pool accessorie that can be re-purposed for the garden if they get worn out would be a cleaning net. They are very specific.
Um paint it would be a start :-)
游泳池。 The phonetics Re you3yong3chi2.