0
What else can I help you with?
How can you replace the tailgate lock on a 1994 gmc jimmy?
Remove the plastic cover on the tailgate. There are screws in the top and sides. After that you should have access to the area where you see the lock. You will have to pull a pin to remove the lock and it should fall right out.
How do you remove the door lock on a 1985 Nissan 200SX?
what you should do is bring it to your local Nissan dealer and have them remove it
Why is the differentil on your MF20 tractor not slipping in turns?
the linkage to the diff lock pedal could be siezed/stiff that's if it even has a diff lock also the spider gears in the diff unit could be damaged causing the diff to lock up
How do you remove the trunk lock of a 1971 Pontiac Ventura?
You have to open the trunk lid, under the lock on the inside you will find a screw, remove the screw and the lock retaining clip, pull the lock out. If you can not open the trunk lid, drill the lock center out, and you should be able to open with a screw driver.
Can any wheel dealership remove a wheel without whell lock key?
Yes, a good mechanic should have the tools to remove a wheel lock without damage to the wheel.
How do you install a door lock on a 1988 silverado 1500 pickup truck?
You'd have to remove the trim from the door. The lock tumbler is typically held in by some sort of clip... you remove that, and the lock tumbler should pop right out.
How do you remove lawn mower wheel with no lug nuts?
There should be a lock ring on the axle that prevents the wheel from sliding off while in service. Remove the lock ring and slide the wheel off the axle. You may need a lock rings pliers to remove it, or you might be able to do it with a small screw driver.
How can I safely and effectively remove a door lock?
To safely and effectively remove a door lock, you should first ensure the door is unlocked. Then, use a screwdriver to remove the screws holding the lock in place. Once the screws are removed, carefully pull the lock out of the door. Be cautious of any sharp edges or moving parts. If you are unsure, it is recommended to seek professional help to avoid damaging the door or lock.
How do you remove ignition lock on a Chevelle with no keys?
You could try removing a door lock, bring to a locksmith to have key made - should be the same as ignition
How do you remove the key from the lock ignition?
1996 rodeo- how to remove key from lock ignition?
How do you remove glovebox lock in 67 Chevelle?
should be 2 phillips head screws holding it in.
After removing the door panel how do you remove the lock cylinder located on a 1996 Honda Civic Dx?
The lock should have a small arm off of it that will clip or snap to the linkage. The lock cylinder will be held to the door with a clip, needle nose pliers or a long screwdrive will remove this try going slowly from side to side it should fit snugly but will remove. (Be careful if you have the power window option)
