0
If they are not underwater you use an angle grinder to cut them flush with the concrete, then use a hammer and cold chisel to beat the metal in the concrete down below the surface. then make up a strong mix of sand cement mix it with a bit of bond-crete this will waterproof it and make it stick inside the hole make the top flush. "Done"
Shelley Hill Pools has over 40 years of experience providing in ground, concrete, indoor, built in, and infinity pools, in new york, hudson valley. Our focus on quality and aesthetics has made us one of the leading providers of high-end pools in the community, which is why we are the top choice for many of your neighbors. you can look us up at shelleyhillswimmingpools.com
What else can I help you with?
Remove in ground pool?
Be more specific please- what about removing it? cost? difficulty? What type of pool is it? fiberglass? vinyl liner? concrete?
What are the best installation techniques for wrought iron handrails on concrete steps?
The best installation technique for wrought iron handrails on concrete steps involves drilling holes into the concrete, inserting anchor bolts, and securing the handrail with nuts and washers. It is important to ensure the handrail is securely attached to provide stability and safety.
Is a concrete pool or vinyl pool better in Northern Kentucky?
A concrete pool is better any where if it is done professionally.
Is there anything that can be put in your pool to redye your concrete pool dark blue?
There does not appear to be anything that can be put in your pool to redeye your concrete in the pool dark blue. This can only be achieved by draining the pool and painting the concrete a dark blue color.
How do you turn a fully concrete liner pool into a fully concrete pool with out a liner?
by taking the liner away!
Is it possible to change a concrete pool into a liner pool if your inground concrete pool has cracks along the side down near the bottom?
Yes it can be done
What pool is best?
concrete
Do you have to remove concrete from inground pool to fill in?
Yes, you typically need to remove the concrete from an inground pool to fill it in properly. This ensures that the area can be filled with appropriate materials that will compact well and prevent future settling or sinking. Additionally, removing the concrete helps avoid potential drainage issues and allows for better soil management. However, in some cases, it might be possible to leave the concrete in place, depending on local regulations and the specific fill method used.
How do I remove fiberglass finish fibertech from my concrete pool?
Contract a pool contractor to refab your pool. Will cost you extra for removal, but leave it to the professionals. Get multi bids from big and small companies. Never give a huge deposit up front.
What would be the best way to fix a 20 X 40 in-ground liner pool with concrete damage in the deep end?
To fix a 20 x 40 in-ground liner pool with concrete damage in the deep end, first drain the pool and remove any damaged concrete. Repair the concrete by filling cracks with a suitable concrete patching compound and resurfacing the area if needed to ensure a smooth finish. Once the repairs are complete, allow sufficient curing time before reinstalling the liner and refilling the pool. Consider applying a waterproof sealant to prevent future damage.
Can you resurface a marbelite pool surface with another marbelite surface?
NO NO !! You must remove the vinyl completely and then check what substrate you have. Concrete plaster or brick will be fine.
How do you replace the decorative tile border on a concrete pool?
To replace the decorative tile border on a concrete pool, the pool will have to be drained. The old tile needs to be taken off and a new tile with waterproof grout or concrete can be installed. The pool should dry for a week or so, before it is refilled.
