To be on the safe side you really need a test kit, and before doing the chlorine you need to check the pH level as this will control your chlorine. The pH needs to be between 7.4 - 7.6 if it goes above 7.8 then the chlorine does not work very well.
chlorine needs to be higher than 1ppm but below 5ppm the desired amount will be dependent on your plans for the pool and how it is used eg dirty kids in - out in the mud back in again this will eat up chlorine, deodourants hair products cosmetics sweat etc etc anything that gets in the water will eat it up.
But when it comes to how much chlorine to put in it is easier to add a bit more than try and get it out (without buying more products eg. sodium thiosulphate).
It will eventually become like adding sugar to a cup of coffee you get to know how much you need.
Pool brush and occasional chlorine or water changes so it doesn't grow in the first place
1-4ppm
High concentrations of chlorine can and will destroy a vinyl liner.
Yes, liquid chlorine can be used in a vinyl pool as a sanitizer to keep the water clean and safe for swimming. It is effective in killing bacteria and algae, but it is important to follow proper dosing instructions to avoid damaging the vinyl liner. Testing the water regularly and adjusting the chlorine levels as needed will help maintain a balanced pool environment.
Need to rephrase question.
This depends on the size of the pool. Generally, when you buy chlorine, it should say on the bag or box how much to use for what size pool.
one pound of cal hypo, granule chlorine, will treat 10,000 gallons of pool water. So use 1/4 pound to shock, two or three times that if pool goes green. If pool has a vinyl liner use sodium hypochloride, liquid shock, instead of granules.
If it is a vinyl liner pool you have to use a submersible pump. You can get a small one for right at $100.
Yes, you can paint a vinyl pool liner using a specialized vinyl pool paint that is designed to adhere to flexible materials without peeling. It's important to thoroughly clean and prepare the surface before applying the paint. For small cracks in the vinyl, you can use a vinyl patch kit or a flexible sealant specifically formulated for vinyl repairs, ensuring the area is clean and dry before application.
You haven't provided enough information for your question to be answered. The dimensions and depth of the pool, as well as the amount of stabilizer (CYA) you have in the water are required to determine how much chlorine to add. For help with questions like this, as well as completely understanding how to maintain your pool yourself, I highly recommend http://www.troublefreepool.com
If there is too much chlorine in your pool, you can first test the water to confirm the high levels. To reduce the chlorine level, you can aerate the water by running the pool pump and opening the pool cover to let sunlight break down the chlorine. You can also partially drain the pool and refill it with fresh water to dilute the chlorine concentration.
The amount of chlorine needed for a pool can vary based on its size, the current chlorine level, and environmental factors. It's best to use a pool water test kit to determine the chlorine levels and then follow the manufacturer's instructions on how much chlorine to add to achieve the appropriate levels for safe swimming.