This is quite a project! Make certain that there is no building or removal permit required and that your mortgage company is aware of your plans before you get going on this.
Answer
I am going through this process right now. I calculated the average depth of shallow half to be 4.5 ft. To fill shallow half is (16 x 16 x 4.5) = 1152 ft2. Divide that by 27 (ft3 in yd3) = 42.7 yd3. I then doubled that amount for the deep end so came up with a total of about 128 yd3.
I figure the 128 will be about 8 loads of cheapest dirt and 2 loads of top soil. In NE Arkansas, that ill be about $1600.
My pool is a hybrid pool with concrete bottom and fiberglass sides. I'm going to cut and pull out fiberglass sides and use a Bobcat to lift concrete skirt and dump into pool.
I have read that you should break up the bottom concrete, but since the shallowest concrete will be at least 3 ft under the surface, I think that will be very little problem. Anyone have thoughts on that?
The homophone for "to put in ground and covered with dirt" is "bury."
The homophone for "put in the ground and cover with dirt" is "bury."
With a shovel and dirt
bury berry
Bury
The may like getting dirty or playing in the dirt.
The homophones for the given descriptions are: bury/berry.
No, it is not safe to bury pressure treated wood in dirt because the chemicals used to treat the wood can leach into the soil and pose a risk to the environment and human health.
There are several animals that bury themselves. Lizards, turtles, hedgehogs and the scarab beetle all bury themselves in dirt.
Dig hole, insert calf, cover with dirt.
The homophone of "to put in the ground and cover with dirt" is "berry." Both words, "bury" and "berry," sound the same but have different meanings. "Bury" means to put something in the ground, while "berry" refers to small round fruits.
A homophone for "put in the ground and cover with dirt" could be "buried."