answersLogoWhite

0


Best Answer

That normally depends on where you are getting the liner from, but in most cases, you measure the pool diameter and actual pool wall height. When you order the liner, let the liner manufacturer know the liner is for an above-ground pool with an overlap liner. The liner manufacturer will then make the pool wall enough longer to allow several inches of liner material to fold over the top of the pool wall and anchor it in place with the liner locking strips.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much pool liner do you allow at top for overlap pools?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you use pool liner for pond liner?

My neighbor has a large pond made with a swimming pool liner and has had no problems ,but his liner is one of the older liners and is really heavy duty .They don't seem to make them as heavy duty anymore .I guess they don't want them to last .The newer ones are much lighter so people can put in the pools themselves .


Why is a steel wall pool better than a concrete wall pool?

All depends on what you are looking for and how much you have to spend. Concrete pools are usually considered the "high-end" pool but installation takes a long time and maintenance and repair are costly. Steel pools, or I'm assuming you're referring the vinyl liner pools, are a good, cost efficient option. Though, if you want to extend the life span of your pool, check out the other building materials used for vinyl liner pools.. such as Fiber Reinforced Composite Materials.


Pros and cons of fiberglass vs steel walls for Vinyl liner pools?

Fiberglass doesn't rust and can be repaired if need be. steel is much harder to do anything with once things start needing repairs


How much does it cost to install a vinyl swimming pool versus fiberglass pool?

Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand


What does it mean when branches of science overlap?

when science branches overlap that means that they are overfilled with to much information


How much overlap should there be between strokes with portable belt sanders?

I use 30 % overlap on most surfaces.


How much does trench mesh need to overlap?

500mm


Inground Pools: How to Select the Right One?

Purchasing a pool is a large investment for any homeowner. There are several different types of inground pools available, so selecting the right one can be a challenge. Currently, fiberglass, concrete and vinyl liner inground pools are being sold. Comparing each type can make buying a pool much simpler. Fiberglass inground pools are a great choice for pool buyers. They are pre-constructed at a factory and shipped to the desired location in one piece. A customer simply selects their preferred size and shape from a catalog. Fiberglass pools are typically the most expensive pool on the market, but they last the longest. In the long run, a fiberglass pool will require less repair and fewer chemicals than other pool types. It usually takes only a few weeks to install a fiberglass pool from start to finish. The inside of fiberglass pools is smooth to the touch. For homeowners that desire more freedom designing their pool, then a concrete one would be the best option. Concrete inground pools are currently the most popular on the market. They are custom created by pool builders, which is great for customers who have a difficult yard shape. Concrete is usually less expensive than fiberglass, but requires more care over the years. Unlike fiberglass, a concrete pool is built in stages, so the construction time tends to be longer, usually one to three months. These pools come with a wide variety of finishes, from rough plaster to smooth tile. Less popular are vinyl liner inground pools. These pools are typically sold to the consumer in a kit form and put together by the owner. First, the ground must be excavated to fit the pool, and then it is placed inside. The sides of vinyl liner pools are constructed from steel. Once erected, they will be permanently supported by concrete. A vinyl liner is then spread over the sides and bottom. These pools are very popular in parts of the country where there are cold winters, as they can be easily drained and covered until the weather warms back up. Swimmers enjoy the smooth surface of the liner, but it can accrue more damage than other pools types.


Who is the artist named A Genti Pinni?

Purchasing a pool is a large investment for any homeowner. There are several different types of inground pools available, so selecting the right one can be a challenge. Currently, fiberglass, concrete and vinyl liner inground pools are being sold. Comparing each type can make buying a pool much simpler. Fiberglass inground pools are a great choice for pool buyers. They are pre-constructed at a factory and shipped to the desired location in one piece. A customer simply selects their preferred size and shape from a catalog. Fiberglass pools are typically the most expensive pool on the market, but they last the longest. In the long run, a fiberglass pool will require less repair and fewer chemicals than other pool types. It usually takes only a few weeks to install a fiberglass pool from start to finish. The inside of fiberglass pools is smooth to the touch. For homeowners that desire more freedom designing their pool, then a concrete one would be the best option. Concrete inground pools are currently the most popular on the market. They are custom created by pool builders, which is great for customers who have a difficult yard shape. Concrete is usually less expensive than fiberglass, but requires more care over the years. Unlike fiberglass, a concrete pool is built in stages, so the construction time tends to be longer, usually one to three months. These pools come with a wide variety of finishes, from rough plaster to smooth tile. Less popular are vinyl liner inground pools. These pools are typically sold to the consumer in a kit form and put together by the owner. First, the ground must be excavated to fit the pool, and then it is placed inside. The sides of vinyl liner pools are constructed from steel. Once erected, they will be permanently supported by concrete. A vinyl liner is then spread over the sides and bottom. These pools are very popular in parts of the country where there are cold winters, as they can be easily drained and covered until the weather warms back up. Swimmers enjoy the smooth surface of the liner, but it can accrue more damage than other pools types.


How much overlap should be provided between Access Point?

15%


How much is poolcrete?

Maybe concrete that they put in pools?


Is bed liner as good as rhino liner?

I personally like Rhino liner, although it is quite a bit more expensive, it has lasted so much longer than basic liner, therefore costing less in the long haul. I would recommend it.