For a non-INTEX pool you need 50 lbs. of salt for 2,000 gallons. or water capacity in gallons X 0.025.
To raise the water level in the beaker, you should add more water to it. The amount of water added should be equal to the volume you want the water level to increase by.
stones :)
depends how many gallons
and I'll raise you 18 gallons and make it 50?
sugar
how to raise ph level from 6.2 to 7.4? Chlorine is 3.
To raise the temperature of 1 gallon of oil by 1 degree Fahrenheit, it typically requires about 1,800 BTUs. This value can vary slightly depending on the specific type of oil, but 1,800 BTUs is a commonly accepted estimate for heating purposes.
It takes 8.33 BTU to raise the temperature of water 1 degree F.
To raise the total alkalinity in a 20,000 gallon pool, you can typically add 1.5 pounds of baking soda for every 10 parts per million (ppm) increase you desire. Calculate how many ppm you need to raise your alkalinity by, and then use this ratio to determine the amount of baking soda needed for your specific situation.
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
12% is $1.14 added to the $9.50 for a total of $10.64
If you feel you need a raise then yes, you should. Hope this helps. :)