1/2 a bag will cover up to 5,000 gal & is still safe for a 3800 gal pool; use 1/2 a bag about every 4 to 6 days. Shock will clear the green but may not clear the cloudiness if you wait too long, but the water should still be safe to swim in; have your water tested by your pool professional at least once a week, it's usually free.
3800 gals of pool water shock it with 1 gal bleach
It depends on the type and concentration of the pool shock. In general, 1 pound of pool shock can treat about 10,000 to 15,000 gallons of water in a swimming pool. You should always refer to the specific product label for instructions on how much to use.
A 16-foot by 32-foot by 4-foot pool can hold up to about 15,320 gallons of water.
one pound of cal hypo, granule chlorine, will treat 10,000 gallons of pool water. So use 1/4 pound to shock, two or three times that if pool goes green. If pool has a vinyl liner use sodium hypochloride, liquid shock, instead of granules.
To determine the appropriate amount of shock powder for a 15ft by 42in pool, you typically need about 1 pound of shock per 10,000 gallons of water. A pool of that size holds approximately 4,500 gallons. Therefore, you would use about 0.45 pounds (or approximately 7.2 ounces) of shock powder. Always refer to the specific product instructions for precise dosing, as concentrations can vary.
measuring pool shock treamentif its 1lb for 12,000 gallons than half of that would be 1/2 lb for 6000 gallons. 1/4 lb. for 3000 gallons. I would use a little less than 1/4 lb. of Shock.Maybe get a 1/4lb. and separate it into 3 equal parts. Then just use 2 parts for your 2000gallons pool.
The frequency of using shock tablets in 3,800 gallons of water, such as in a swimming pool or spa, typically depends on factors like water usage, weather conditions, and the presence of contaminants. Generally, it's recommended to shock the water every 1-2 weeks, or more frequently after heavy use or rain. Always follow the manufacturer's guidelines for dosage and frequency to maintain optimal water quality.
About 3 gallons
15' diameter round pool 4' deep 15'^2/4*pi*4'*7.48(gal/ft^3)=5287 gal
For a 1,700-gallon pool, you typically use about 1 pound of chlorine shock per 10,000 gallons of water, so you would need approximately 0.17 pounds (or about 2.7 ounces) of shock. For algaecide, the recommended dosage can vary by product, but a common guideline is about 1 ounce per 5,000 gallons, meaning you would use around 0.34 ounces for your pool. Always check the product label for specific instructions and adjust based on your pool's current chemical levels.
Olympic swimming pools use about 650000 gallons of water, so if you're trying to shock one using 10% liquid chlorine, you would need about 200 gallons of liquid shock - or if you're only adding choline as a primary sanitizer, not as a shock, you'd use about 65 gallons.
.03g/L or 30 ppm or 1 lb for 3800 gallons (14400 liters)