Here's a formula for round pools:
distance across*distance across*depth*5.9
for rectangles:
length*width*depth*7.5
or for a deep end:
length*width*((shallow end depth + deep end depth)/2)*7.5
so in your case, 24*24*4.3*5.9=15000 gallons
24/7 filtration
Because putting a cover on your pool makes it much more hot in the space between the cover and the water. The water will evaporate much quicker because of the increased temperature.
Chlorine typically takes about 24 to 48 hours to dissipate in a swimming pool, depending on factors such as sunlight, temperature, and water circulation.
Long enough to turn over the full amount of water in the pool every 24 hours.
821.
18,000
If its an oval pool approx 7800 gallons at full capacity. If its rectangular pool then approx 9000 Gallons.
I depends if it is a chlorinated pool. If so, wait 24-72 hours. If it is natural water, you do not have to wait.
Swimming in a chlorinated swimming pool would not be a problem. However, if it is a lake or untreated pool, I would wait at least 24 hours for the injection site to close before letting them go in the water to be safest.
There are 13,536 gallons in a 24 foot diameter pool that has 4 feet of water. Not true for a pool that is 4 feet in height. This would hold less than 4 feet of water.
'bout 1500 to 2000
It is recommended to wait at least 24 hours after adding borax to your pool before swimming to allow it to fully dissolve and distribute evenly in the water. This will ensure that the pH and alkalinity levels are balanced and safe for swimming.