To fill a 12x30 above ground pool, you first need to calculate its volume. The formula for the volume of a cylindrical pool is V = πr²h, where r is the radius and h is the height. For a 12-foot diameter pool, the radius is 6 feet, and if the height is 30 inches (2.5 feet), the volume is approximately 282.74 cubic feet. Since there are about 7.48 gallons in a cubic foot, you'll need about 2,112 gallons of water to fill the pool.
how long will it take to fill a 3998 gal above ground pool, with a standard water hose
hose or some places the local fire dept will come and fill it for you for a donation
problem nobody nos go do it you wont
15000 gallons
About 18,000 gallons.
if it's 4 ft deep 21,139.948 gal.
Yes
Fill it to the bottom of the opening which is above the cells. Use only distilled water and not tap water or drinking water.
You don't "start" an above ground pool. You start cars, motors and engines. You need a hose and water flowing through the hose and stick the hose in the bottom of the pool. Then you wait days for it to fill.
It has to be filled above the skimmer ( flow to pump) or else the filter will not work. Also, if too low the liner may dry out above the water line and cause it to shrink.
It would fill about 91,000 residential in-ground swimming pools.
The impermeable layer is underground where there are no empty spaces for water or air to fill. This layer blocks the movement of water and other fluids, preventing them from passing through. It acts as a barrier between permeable layers above and below it, restricting the flow of substances through the ground.