0
You can swim in it immediately Obviously the above person does not know what they are talking about. Better answer would be to wait 20 minutes for the pump to circulate the water and to keep you from swimming through a cloud of ACID. You would certainly regret swimming thru the acid if it got into a wound even a small cut or in your eyes or mouth or mucous membranes.
What else can I help you with?
Is sulfuric and muratic acid the same?
Muratic acid is another name for hydrochloric acid, so it is not the same thing as sulfuric acid.
Can muratic acid harm aluminum?
i want to clean algi from pontoons on my pontoon boat,,can muratic acid be used??????
What other names does hydrochloric acid go by?
muratic acid
Chemical formula for muratic acid?
Formula: HCl
What is the old name for hydrochloric acid which is used to remove calcium carbonate deposits in toilets?
Muratic Acid
Whats the ratio of baking soda to water for neutralizing muratic acid?
not sure
Muratic acid and discoloring of concrete?
muriatic acid should not cause discolouration to concrete it will eat it away though.
What chemical is added to water in swimming pools to keep it clean?
HOCL or hypochlorus acid
Can you substitute muratic acid for battery acid?
No, you should not substitute muriatic acid for battery acid. Battery acid is typically sulfuric acid, which has different properties and concentrations than muriatic acid. Substituting one for the other can damage the battery and may be dangerous.
How much acid and chlorine should be added to a 5000 liter swimming pool?
How much acid and chlorine should be added to a 5000 liter to make 5 ppm solution
Is powder conditioner used for the same result as using muratic acid?
No, powder conditioner and muriatic acid serve different purposes in pool maintenance. Powder conditioner is typically used to stabilize chlorine levels and protect against UV breakdown, while muriatic acid is used to lower pH and total alkalinity levels in swimming pools. Both are crucial for maintaining balanced water chemistry, but they have distinct functions.
How do you use muratic acid to clean buildup in cell of a chlorine generator in salt water pool and What are the proportions of muratic acid and water that you pour in to the cell unit?
To clean buildup in the cell of a chlorine generator, first, disconnect the power and plumbing to the cell. Then, create a diluted muriatic acid solution with a ratio of 1 part acid to 10 parts water. Carefully pour the solution into the cell and let it sit for a few minutes before gently scrubbing the buildup with a soft brush. Rinse the cell thoroughly with water before reconnecting it to the system.
