0
If this a vinyl liner pool... the grate (anti vortex dome) is attached by two screws. the main drain frame is held on with 8 screws and should not be removed. With either vinyl or concrete application.... 1. blow air down the bottom drain line to dislodge the pebbles using a compressor or a blower ( used for winterizing lines and is available from many pool stores) 2. remove them by hand from the bottom drain Jim
What else can I help you with?
How do you replace ac pressure sensor 2000 ford focus?
All that you need to do is unscrew if from the suction side and replace it...........
How can I effectively unscrew a shower drain to address any clogging or maintenance issues?
To effectively unscrew a shower drain for clogging or maintenance, you will need a screwdriver or a drain key tool. Insert the tool into the drain and turn it counterclockwise to loosen and remove the drain cover. Once the cover is off, you can access the drain pipe to clear any clogs or perform maintenance. Be sure to wear gloves and have a bucket or towel handy to catch any debris that may come out.
How can I open a tub drain?
To open a tub drain, you can use a drain key or pliers to unscrew the drain cover counterclockwise. Once the cover is removed, you can clean out any debris or hair clogging the drain.
How can I remove a sink stopper that is stuck without using a suction cup?
To remove a stuck sink stopper without a suction cup, you can try using pliers or a wrench to grip and twist the stopper counterclockwise. If that doesn't work, you may need to unscrew the nut underneath the sink to release the stopper.
How can I safely and easily change light bulbs using a suction cup light bulb changer?
To safely and easily change light bulbs using a suction cup light bulb changer, follow these steps: Ensure the suction cup is clean and free of debris. Attach the suction cup to the light bulb firmly. Twist the changer counterclockwise to unscrew the bulb. Carefully remove the old bulb and replace it with a new one. Twist the changer clockwise to secure the new bulb in place. Gently remove the suction cup from the bulb. Remember to always turn off the power before changing the light bulb to avoid any electrical hazards.
How do you remove the front drivers side cv joint from a 1997 Olds bravada?
unscrew it unscrew it unscrew it unscrew it
What is an synonym for unscrew?
A synonym for unscrew is alleviate
What rhymes with unscrew?
New rhymes with unscrew.
How do you change the spark plugs on a 2000 Hyundai Tiburon?
you simply remove the old ones and you install the new ones. they are on the engine. there is a plastic panel on the top of the engine (it says Hyundai). It has 4 wires going into it on the right. Unscrew the 5 bolts. You will see the 4 wires go to little suction cup looking things. the suction cup looking things pull out, but pull on the suction cup looking thing, not the wire. there is one spark plug at the bottom of each. get the correct wrench (ask your auto parts store) with an extension. take the old spark plugs out and screw the new ones in.
Why is my bathtub stopper stuck and how can I fix it?
Your bathtub stopper may be stuck due to debris or hair clogging the drain or the stopper mechanism being worn out. To fix it, try using a plunger to dislodge any blockages, or unscrew the stopper and clean it thoroughly. If these methods don't work, you may need to replace the stopper mechanism.
How do you take off your tongue ring?
unscrew the barbells. unscrew the barbells.
How can I safely and effectively use a light bulb changer suction cup to replace light bulbs in high ceilings?
To safely and effectively use a light bulb changer suction cup to replace light bulbs in high ceilings, follow these steps: Ensure the suction cup is securely attached to the light bulb changer tool. Position the suction cup over the light bulb and press firmly to create a strong seal. Twist the changer tool counterclockwise to unscrew the old bulb. Carefully remove the old bulb and dispose of it properly. Insert the new bulb into the changer tool and position it over the socket. Twist the changer tool clockwise to securely screw in the new bulb. Gently release the suction cup from the bulb and lower the changer tool safely. Remember to always use caution and follow safety guidelines when working with electrical fixtures at heights.
