answersLogoWhite

0

Yes, the whirlpool setting is simply a setting that pumps water, but bypasses the filtration system hence increasing flow volume.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why is the AC automatically on when air flow control is in the recirculate position on 2002 cavalier?

WHEN YOU SELECT RECIRCULATE THE HUMIDITY LEVEL CAN INCREASE SIGNIFICANTLY IN THE CAR SO THE A/C IS TURNED ON TO DE-HUMIDIFY THE AIR, JUST SELECT A WARMER SETTING TO MAKE IT COMFORTABLE.


What is tropical AC?

This setting inhibits the vehicle from collecting all of its intake air from the outside, similar to a 'recirculate' button, so that the A/C does not have to keep drying the salon air.


What setting should you have your pool on for normal operation?

If you're talking about your pool filter, it should be set to filter or run. Use the bypass or recirculate setting if you wish to circulate the water without having the water pass through the filter. Use the backwash setting to clean the filter.


What are the benefits of using a ductless fumehood in a laboratory setting?

Using a ductless fume hood in a laboratory setting offers benefits such as cost-effectiveness, flexibility in placement, energy efficiency, and the ability to filter and recirculate air, reducing the need for external ventilation.


Have a 12x24 inground pool 1hp motor 9 jets do not work?

Going to need more specifics here. How many jets do work? Are your valves in front of the pump turned on? What setting is the filter on? Try turning the filter to recirculate/bypass/whirlpool to bypass the sand and eliminate sand problems as a possibility. Does the pump come on and hum or does it spin full speed? Is there air in the lines? Is the pump pot priming all the way?


What setting is used for normal operation of a pool while swimming?

If you have a sand or DE filter the setting is filter in the case of cartridge filters it is filter as always unless there are other settings for your particular setup.


Why air from outside goes through the vents in your Chevy astro van when air conditioning is on?

You have the system set to allow outside air to circulate into the vehicle. You can change this to the recirculate mode which will only circulate inside air. Look for the button to change the setting.


How does a ductless fume extractor effectively remove harmful fumes and contaminants from the air in a laboratory setting?

A ductless fume extractor uses filters to capture and remove harmful fumes and contaminants from the air in a laboratory setting. The filters trap the particles and chemicals, preventing them from being released back into the environment. This helps maintain a safe and clean working environment for laboratory personnel.


How would one go about bypassing internet filters?

There are a number of possible ways in which one can go about bypassing internet filters. These include de-filter sites, setting up a new proxy or using a program called Ultrasurf, which can be accessed online.


How do use a multi valve pool filter?

Need more specific info A multi valve pool filter is a common configuration of valve and filter for a swimming pool system. The piping into and out of the filter is attached to a multivale. A multivalve has has several positions. One type of multi valve has six positions: backwash, waste, filter, closed, rinse and recirculate. (These valve positions are used on a DE filter. A sand filter may be different.) Use the filter setting in the nromal operation of your pool. This setting receives water from the pump and directs it to the dirty side of the filter media and then receives weater from the clean side and directs it to the pool. Use the Backwash setting to flush the DE from the filter and to a drain. Use the waste setting to flush water directly from the pump to the drain. The closed position is, well, closed. Rinse? Recirculate?


Fan wont go off when button is pressed only display goes off fan still blows air and it changes to feet setting how to fix this problem on your 1999 Infiniti G20 Dealer wants just to run a diagno?

Hit the recirculate air button.


How do you pump the pool down a couple of feet?

One way if you have a sand filters is to use it's waste setting. That directs the flow of water out the backwash line without filtering it.