answersLogoWhite

0

it goes ....pump, filter, heater, auto feeder, back to pool...this way the super chlorated water doesn't hurt the heat exchanger...

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What are the steps involved in furnace heat exchanger replacement?

The steps involved in furnace heat exchanger replacement include turning off the power to the furnace, removing the old heat exchanger, installing the new heat exchanger, reconnecting all components, testing the furnace for proper operation, and ensuring everything is working correctly before turning the power back on.


What is the proper English form of Have you wrote to us regarding this issue before?

It should be: Have you written to us regarding this issue before?


Why does carbon dioxide and water vapour need to be removed from the air before being pumped through a heat exchanger?

We remove water vapor and carbon dioxide from air before liquefying it because these two substances will go solid at temperatures that air liquefies, and separating them keeps either solid H2O or CO2 from messing up our equipment and/or plugging up our plumbing.


What is split flow heat exchanger?

A split flow heat exchanger is a type of heat exchanger where the hot and cold fluids are split into multiple streams before being recombined. This design allows for more efficient heat transfer as it increases the surface area of contact between the two fluids. Split flow heat exchangers are commonly used in industrial processes where precise temperature control is required.


What happens to the primary cooling water in a pressurized water-reactor?

In a pressurized water-reactor, the primary cooling water circulates through the reactor core to remove heat generated by the nuclear fission process. This heated water then transfers its heat to a secondary water loop through a heat exchanger, where the secondary water is converted to steam to drive a turbine and generate electricity. The primary cooling water is then cooled down in a separate heat exchanger before being recirculated back into the reactor core.


What safety precautions should be taken before cleaning a heat exchanger?

Prior to cleaning a heat exchanger, one should be sure to use hand, body, and eye protection. One should not conduct acid and bleach flushing simultaneously, as this produces a noxious gas which can be lethal if inhaled for an extended period of time.


Why use cation exchanger before anion exchanger in zeolite method of water softening?

If Anion exchanger use before cation exchanger in water treatment system then following problem occured 1. Deposition of sulphate in bed at high pH. 2. Elimination of CO2 Gas will not possible at high pH. 3. Due to very high pH in Cation unit sludge will be form which is the cause of strainer chocking & effect to resin quality. 4. Increse possibility of sodium slippage.


How To Replace Your Heat Exchanger When Its Not Performing Up To Par?

The heat exchanger is very important to the operation of your boiler or furnace system within your home. This is the part that takes the heat and disperses it into the air or water for distribution of your home. If your current heat exchanger is not performing correctly, here is a simple guide to help you install a new one on your boiler or furnace unit. Step 1. When you are planning on installing a new heat exchanger, the first thing that you should consider is safety. Working with boilers and furnaces can be extremely dangerous. Little accidents, such as punctured hoses or disconnecting the wrong pipes that carry steam could cause you to get seriously burned. You should also wear protective work gloves because there is the potential of getting cut on sharp edges that may be present. Power to these appliances should be turned off at the main electrical circuit breaker. Since the furnace will be turned off, you should do this type of project in warmer weather conditions. Give these appliances enough time to cool down before proceeding. Step 2. If you are replacing an existing heat exchanger, you will first need to remove the old one. This is located behind a panel on your boiler or furnace appliance. Remove the panels located on the front of your furnace or boiler with a screwdriver. These panels can be extremely sharp and cause you injuries. To identify the heat exchanger, you will be looking for pipes and tubing coming off of what looks to be a bulky metal panel. You will need to write down where each of the pipes, clamps, hoses, or other part that is connected to the heat exchanger goes for easier re-connection. If it is possible to get a camera in there, you can also take a picture of the heat exchanger and its connections for future referencing. Remove all of the fittings that connect to the heat exchanger so that it can be removed from the furnace. Step 3. Reconnecting your new heat exchanger is very simple if you took good notes on the connection placements or took pictures of the old heat exchanger set up. If your heat exchanger kit has new fitting that need to be installed, you can replace the old ones with the new fittings. If the set up and fitting are the same, you can just replace the hoses, clamps, pipes and other hardware on your new heat exchanger. You will need to let your furnace sit for a few hours before you can replace the panels and turn the power back on to the furnace.


What was the attitude of the churches regarding the persecution of the Jews?

their attitudes were different before, during and after


Do modern houses have higher levels of indoor pollution because they are more fire resistant?

No, it has to do with the fact that modern buildings are better insulated (for heating/cooling) and better sealed to prevent air leaks (which cause loss of hot/cold air to the outside). This reduces the number of air exchanges that happen per hour with the outside to bring in fresh air. With less fresh air the pollutants concentrate in the internal air. Some HVAC systems partially correct this issue by using forced air heat exchanger systems that draw in outside air through a heat exchanger while exhausting inside air through the same heat exchanger so that the fresh outside air is warmed/cooled to the temperature of the inside air before being released inside and the dirty inside air is cooled/warmed to the temperature of the outside air before being exhausted outside. This helps but can add significant cost to the HVAC system and does not work in a power failure.


What is star 68?

What is the reference to *68 regarding my phone?


Did Oliver North testify before Congress regarding Osama Bin Laden?

you tell me