answersLogoWhite

0

tighten the nuts and bolts and clean the heads with crl or soap scum remover- or replace

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why the shower head still leaks when turn off the water?

The valve in the shower control needs to be renewed.


Just installed a new shower pressure balancing set and water leaks out the shower head when you turn the water on?

Yes and what is the question?


How can I install a shower head in the wall?

To install a shower head in the wall, first locate the water supply pipes behind the wall. Turn off the water supply to the shower. Use a drill to create a hole in the wall for the shower head pipe. Insert the shower head pipe into the wall and secure it with a mounting bracket. Connect the shower head to the pipe using plumber's tape to prevent leaks. Turn the water supply back on and test the shower head for proper function.


What is the process for shower hose replacement and how can it be done effectively?

To replace a shower hose effectively, first turn off the water supply. Unscrew the old hose from the shower head and the water pipe. Install the new hose by screwing it onto the shower head and water pipe. Make sure it is securely attached. Turn the water supply back on and test for any leaks.


How can I efficiently turn off the water to the shower to conserve water and prevent any leaks or damage?

To efficiently turn off the water to the shower to conserve water and prevent leaks or damage, locate the shut-off valve near the shower and turn it clockwise until the water stops flowing. Check for any leaks or drips after turning off the water to ensure there are no issues.


How can I replace a hand held shower hose?

To replace a hand-held shower hose, first turn off the water supply. Unscrew the old hose from the shower head and the handheld shower attachment. Then, attach the new hose by screwing it onto both ends. Turn the water supply back on and test the new hose for leaks.


How can I remove the shower head arm?

To remove the shower head arm, you will need to use an adjustable wrench to unscrew it from the pipe in a counterclockwise direction. Make sure to turn off the water supply before attempting to remove the arm to avoid any leaks or water damage.


Why does my shower head whistle when I turn on the water?

Your shower head may whistle when you turn on the water due to a buildup of mineral deposits or a loose washer inside the shower head. This can cause the water flow to be disrupted, creating a whistling sound. Regular cleaning and maintenance of the shower head can help prevent this issue.


How can I change my shower head?

To change your shower head, first turn off the water supply. Then, unscrew the old shower head using a wrench or pliers. Clean the pipe threads and wrap them with plumber's tape. Finally, screw on the new shower head and turn the water supply back on.


How can I replace the shower head washer in my bathroom?

To replace the shower head washer in your bathroom, first turn off the water supply to the shower. Unscrew the shower head from the pipe using a wrench. Inside the shower head, you will find the washer. Remove the old washer and replace it with a new one of the same size. Reattach the shower head to the pipe and turn the water supply back on.


How do I fix my shower faucet?

Remove the shower head and clean out anything that might be blocking it, such as hair or debris. Replace the shower head and turn on the water; the water should be running.


Shower lever quit diverting water to the shower head Water flows fine through the faucet but when you turn the lever to divert to the shower head there was a banging noise and then no water.?

you did not pay bill