0
Are your test strips old. Get new ones for accuracy. High pH= with the circulation on - add more muriatic acid and test in 20 min. Need 7.6 stabilized readings. Stabilizer= add 5# per 10,000 gal. You need 50 to 80 ppm stabilizer/conditioner levels. Add more chlor with circ. on and test with in 20 min. If no reading you did not add enough chlor. -- add more. Keep this up until you get the readings you need. Then that will be approx how much chlor your pool will take almost each time it needs it. But you have to get the condit. to required levels. It may take 3 to 4 days to get there depending upon how warm the water is.
What else can I help you with?
Why won't the stabilizer level stay up?
For a few reasons: -You are so unstabalized that the stabalizers can not go down -You are not moving -They are somehow already down
Do cartoon strips appear in the newspaper?
Yes , cartoon strips are to be found in the newspapers and they usually have a color Sunday comics edition .
Which country did fettuchini come from?
Do you mean Fettuccine (little strips of pasta) if so then Italy.
Another word for cut into long thin strips?
another word for cut a little?
How do you check the ppm of salt in a salt system pool?
You can buy salt test strips and electronic salt testers at any good pool supply store - Leslie's carries them.
Why do test strips show no chlorine reading even after stabilizer and chlorine were added if the pH and alkalinity are fine?
How much chlor added? Add at least a gallon of chlor. less if vinyl pool. Test in 20 min. and adjust as needed. Ph and alk = fine. Hmm, what are your readings? How old are test strips? Have they been left in the sun or outside? = no good then get new ones. k
I have removed the reflective strips from an ambulance but can't get the residual adhesive off. Is there a solution for this?
I find that WD-40 actually works pretty well. And there are commercial products that are specifically designed to be "sprayed on" and will dissolve adhesive. Be sure to use a good grease cutter (409, Simple Green, Big Orange, etc.) to remove any residual adhesive remover, whatever one you choose.
What should you do about swimming with your ileostomy?
I get waterproof strips to stick around the base plates. You can get these from coloplast. Also I wear a costume especially made for people with stomas, there is a little pocket on the inside of the costume for peace of mind. I find that a patterned costume hides the lumps and bumps created by having a bag so no one knows you have one.
How water is contaminated?
To tell how acidic it is you can use pH strips. --- Hopefully not. There's so much chlorine in our tap water that when you turn on the cold water it smells like a swimming pool.
How do you get the alkalinity right in a freshwater tank?
You can buy pH tester strips from any pet shop, use them to determine the current pH. level, which is how acidic or basic the water is, and then you can buy tablets to correct the pH and alkalinity to a neutral 7.0. The brand of dip test strips I use is Jungle Quick Dips and the stabilizer I use is Jungle Correct pH, they have worked thus far since I have became an aquarium hobbyist.
What is the purpose of the little plastic strips packed with new dress shirts?
To keep the collar straight (keeps the ends from curling under). They go in the little slots underneath the collar.
What is the price of veet wax strips?
the veet wax strips cost about £6 for 20 strips or 16 strips for about £4 in the uk thankyou
