0
What else can I help you with?
Where do you discard pool water while emptying?
well at the end of the day they drain the pool then in the morning they fill it up
Does using well water in a pool cause discoloration to pool?
It can. Well water has lots of minerals. Iron, zink etc.
How long does it take to fill a 24 foot by 48 inch pool?
1-2 days. Try to get 2 or 3 garden hoses to fill the pool faster. WARNING: If you get your water from a well fill your pool slowly over 2 to 3 days.
How do you clean a 24 foot round pool that is full of very green water?
First, drain the water. Next, get in the dry pool with a portective suit , rubber gloves and boots on. Then get a pool brush and scrub hard. Last, fill pool with water then drain and fill again. Hard work, huh? well its worth it no need to thank me!!!!Wait yes need to thank me!!!
How much water does a pool use?
Almost nothing if theres a cover on it, otherwise you can lose a few gallons on a hot sunny day.
Should you fill a new pool before adding chemicals?
Yes. And once you start filling your pool, do not stop until the water is up to the tile line. Stopping the water for a prolong time could cause a stain line around the perimeter. If you are filling your pool with well water you may want to pre-filter it to take out the tannins and any metals. If you can't pre-filter your well water; get your system up and running ad treat the water with a stain and scale additive.
Should you go ahead and drain a pool that has turned brown from well water?
you should drain it using your mouth
What shampoo to use for well water?
That depends how hard your well water is. You can use a 'pool kit' to test this.That depends how hard your well water is. You can use a 'pool kit' to test this.
How do you fill a well?
with water
Is it safe to fill pool with hard water?
If there is a good water table in your area you should not have a problem. I would recommend running for an hour on then 2 or 3 hours off especially in dry weather. Of course if people in your house need to take a shower, run the dishwasher, or wash clothes you will need to consider this as well.
Do any tests need to be ran on well water before using it in a swimming pool?
Yes, get it analysed for your own safety.
How long would it take to fill a 6100 gallon pool from the well pump?
The time it takes to fill a 6,100-gallon pool using a well pump depends on the pump's flow rate, typically measured in gallons per minute (GPM). For example, if the pump has a flow rate of 10 GPM, it would take about 610 minutes, or roughly 10 hours, to fill the pool. If the flow rate is higher, the filling time would decrease accordingly. To calculate the exact time, simply divide the pool's volume by the pump's flow rate.
